|
|
Search
Private Messages
Profile
Log in
Register
Help
Fittings for plastic pipes directly affect the quality of pipelines |
| Today, plastic pipes are used very widely – plastic products are installed in almost all newly built houses instead of traditional metal pipes. They are very simple and convenient to install and operate, and the pipes are connected to a single system using special fittings. But in order for the connection to be completely airtight, it is necessary that the products themselves and the fittings for plastic pipes are made of the same material. Only in this case it is possible to guarantee one hundred percent the quality of the received water supply and its long service life. These plastic products can be successfully used for the installation of hot and cold water supply systems, for heating and sewerage systems, etc. The pipes are connected to a single system fairly quickly, and no special skills are required. Soldering can be carried out using a special soldering iron with various nozzles corresponding to the diameter of the pipeline to be soldered. In this case, the soldering iron must be heated to a temperature of +230-250 degrees. The pipes and fittings are put on the ends of a heated soldering iron and held for a short time – from 5 to 8 seconds. It is very important not to overheat both the pipe and the fittings, but it is also not worth reducing the heating time as much as possible, since the parts may not connect properly. After the fittings have warmed up well, the parts are removed from the soldering iron and pressed tightly against each other, trying not to move them so that the solder is not damaged. After cooling, you will get a strong and airtight joint. It is clear to everyone that the fittings for plastic products should only be of high quality, however, as well as the plastic pipes themselves. Therefore, when buying them, it is necessary to pay attention to some of their characteristics – the temperature and pressure of the liquids that will be transported through them, chemical resistance, the ability of fittings and pipes to expand linearly, as well as their diameter. As a rule, the temperature of the transported liquid is determined first, since the service life of the pipeline directly depends on this point. Many manufacturers claim the service life of their products is more than fifty years at an operating temperature of +95 degrees. But it should be remembered that the service life is influenced by a combination of two factors – pressure and temperature. 1xBet offers an exclusive welcome bonus for new customers who register using the 1xbet promo code to claim an exclusive bonus in total of €130. The bonus is available to new users registering an account with 1xbet. This already excellent deal is made even more irresistible by the fact that users can receive a 100% first deposit match bonus up to 130$. |
|
Back to top |
|