There are situations when, while performing reconstruction and repair work, the masters of the construction company "NAME" perform painting work related to various kinds of deformation of the paint layer on the structural elements of the structure. One of these defects is peeling and peeling of the paint. Our craftsmen, pointing out this damage, explain to Customers that it is necessary to involve highly qualified specialists in order to perform painting work, which are the painters of the construction company "NAME". After all, the main reason for peeling paint is the low qualifications of the workers who carried out the staining. In particular, when painting, it is obvious that the work surface was poorly cleaned, either poor-quality paint and varnish materials were used, or the applied paint layer was too thick. We also note other violations of painting techniques that can lead to poor-quality painting. So if the walls are being painted, then the paint may drip onto the floor, the masters of our company explain this by saying that either an excessive amount of solvent was used and the consistency was not maintained, or a layer of paint was applied incorrectly, usually with an overabundance of paint material. If bubbles occur after painting, as a rule, wooden surfaces, this indicates either that the wooden structures were poorly dried, or that the painting work was carried out at elevated temperatures. If there is a wrinkling of the layer of paint applied to the surface, this is an indicator that the paint has been applied too thickly. And if this layer is also a covering, then deformation and cracking of the painted surface may occur. The painters of the construction company "NAME" also say that there are several other causes of cracking of the painted surface, these include non-compliance with the technological cycle when applying multi-layer paint. So if the bottom layer is not dry enough, and the next layer is applied on top of it, this can lead to cracking, the cause of cracking, which is highlighted by our craftsmen, is not observing the temperature regime during painting, usually this process occurs at elevated temperatures. Elevated temperatures during painting operations can also lead to loss of performance of paint and varnish materials, for example, lack of gloss on the painted surface.
There may also be a heterogeneity in the structure of the painted surface, due to the high degree of fine porosity that occurs due to the penetration of fine water particles into the paint layer. The causes of this phenomenon may be precipitation or poorly pressed paint brush, which was soaked in water before use. Looking for where to download new games? On https://svsporngames.com you will find thousands of games for download: action, RPG, strategy, simulation and much more. Choose your category and download games without restrictions! |
Search
Private Messages
Profile
Log in
Register
Help