Search results

I have a 1987 Cruiser and the tanks were replaced with the Moeller tanks you wanted, but couldn't get, before I purchased. One thing you want to make sure of is when you remove the current brackets screwed into the deck is to seal those with epoxy. You might want to test out the holes to see...

Yes, I've heard that Moeller mistakenly threw away the drawings, plans, molds when cleaning up the plant. Too bad. Are your tanks servicable? I'd imagine new ones are pretty expensive now.

I will take them!

First of all, I see that you too, have had the boat bug for awhile. That's a good thing, of course. I have a Suzuki 9.9 with both electric and pull start. Can use to troll or get home. Also had a Tohatsu 9.9 with both from above on another boat.

Hard to find a 1/2 day charter anywhere in Washington. Halibut are not easy in Puget Sound or the Strait of Juan de Fuca. All Star Charters in Everett is good. R&R Charters in Anacortes. You may want to consider a ling cod charter instead. Best of luck!

Perfect rig for camping and boating!

Here is a link to what you need for your AC: https://www.microair.net/products/easys ... nditioners

You could build one from stainless steel railing and fittings available at a marine store. I have built a couple use 3/4" PVC pipe and glued wood dowels inside to stiffen up the PVC. Then I paint it to keep the UV down to a minimum. Here's a shot from our first 22 Cruiser...

I went and there were lots of boats. About half the number of vendors than in past years. Deals on boat? Not so much. There was a beautiful teal Tomcat there. Almost $200K. I'm sure you'll find a good deal on nice boat this spring or fall.

This has been a very worthwhile topic. It would be great to make the final few entries "sticky" so that others may learn the correct procedure for trailer tire inflation.

Yes, you are correct, that is for 1,880 lbs per tire, so approximately 7,500 lbs total. What is the maximum inflation stamped on the sidewall for, I'm assuming, your Goodyear Endurance ST tires? 40 PSI seems low to me. I would probably go with closer to the Maximum inflation for each tire...

Here's a link to a prior discussion in 2020 on same subject: http://www.c-brats.com/viewtopic.php?t= ... c&start=15

Good question. I know this has been discussed before. I run Goodyear Endurance ST tires. Here is a link to the chart for Load/Inflation Information for those tires. https://www.goodyearrvtires.com/pdfs/rv_inflation.pdf If you are running a different brand of tire, please let us know. If you...

Yeah, I thought the same. Gotta keep the quality of new members up or else... :shock:

Facebook Link https://www.facebook.com/CDoryBoats

Congratulations on your new boat! Many adventures await you! I wonder if the factory would be willing to post build pictures like they did on a 23 Venture last year. It would be fun to see it all come together.

Tom, Yes, that route is probably the most protected. However, it is a long trip on the water from Des Moines. I would suggest towing up to either Cornet Bay State Park, which is inside of Deception Pass or to Anacortes. You can launch at Washington Park in Anacortes or pay more and sling your...

Yes, it is very important that the Wallas get enough electricity to fire up like it should. You may want to look at your electrical system to make sure that either engine is wired so that your stove gets adequate juice to start. Do you have an (ACR) Automatic Charging Relay? This is very...

Your best bet is to call Scan Marine in Seattle and ask. Give them the model number of your Wallas and they will happily tell you. You're correct to safely dispose of the remaining fuel in the jug and put in fresh. Your Wallas will thank you :)

I think Trip Smith does a pretty good job, too. He is enthusiastic and is getting his family involved, which is key for the future of any sport/hobby/activity. I agree that he is doing good things for the C-Dory brand. He has over 65,000 subscribers on YouTube, which is a ton of free...