Search results

Thanks Noro Lim! This is actually my 3rd attempt at making a generator shelf. As you know how difficult this can be. I checked out the shelf you made for your boat, great idea with the aluminum bracket clips. The brace underneath of your shelf looks almost identical as the one underneath mine...

The 30 amp socket is putting out 1850watts consistent load. I have one generator, I bought the Companion model only for the 30amp plug. I found using the 20 amp plug it tends to pull out easily from the weight of the shore power cord. For me, I wanted a clean installation that’s why I am using...

Looks like $132,000 for a 2025 22' Cruiser. https://www.boattrader.com/boat/2025-c- ... r-9638146/

Thanks! It’s the Honda EU2200 Companion (with 30amp socket).

I wanted to share my final version of a fiberglass generator/ utility platform I made for my boat. I am able to use this underway at cruising speed also.

Supported underneath and aluminum angle on the ends

Honda EU2200 Generator rubber feet lock in the halfmoon areas on shelf.

White gel coating w/ aluminum fiddley rails.

Made a canvas spray fly to keep the salt spray off of it when underway

Generator/ Utility fiberglass platform Cedar anchor locker for aft anchor.

This is how we did our window curtains. I mounted aluminum slider tracks (sailrite.com) using the existing screws that hold the window frames. My wife plated some Sunbrella canvas and sewed the slider ribbon snaps (comes in lengths) to the back of the curtains. We love this set up, because it...

This is very complicated to explain in a blog post. But here goes. It happens strictly with propeller walk. Most marine gear boxes (reduction gears) turn to the right in forward and turn to the left in reverse. This is why outboards have a trim tab under the cavitation plate. It counters the...

The Midsize Hondas don't offer counter rotating screws. It would be nice for sure. I've learned to use this to my advantage when maneuvering in tight spaces. I found that my boat is highly maneuverable docking and twisting to Port. It will fight me when I try to dock Stbd. side to or twist to...

I agree with Dr. Bob. We do what he did. But use a 5 gallon bucket of your choice with a little bit of water. (same as hanging it over the side) :lol:

We plan on being there this year. Always fun catching up. Question for Tom: Will there be water available at the docks?

If you have the option to get counter rotating screws, do it. The main purpose of doing this with twin engines is to utilize the prop walk when maneuvering with one engine in reverse and on engine in forward. The engine that is in reverse, will back or help pull the engine opposite of the other...

I have twin BF40s on my boat. One engine produces 17 amps of usable charging power. I use the ECOFLOW River Pro power station. I bought a 300watt pure sign wave inverter to charge it up to 200 watts of AC output. That's the max amount one engine can charge with keeping the voltage at 14 volts...

Great post, pictures, and sense of humor. Total awesomeness! Thanks for sharing!

Rooftop for our boat is the way to go for us. Mostly because we use it while underway in the summertime at 18 kts.

When I made my 22 models. I lofted up a half-hull model from my full sized C-Dory. I placed blue tape at 1 foot intervals all over the hull. Took a picture of it then was able to transfer and scale the boat down to make a half hull. That turned into a full wood model then to a mold to multiply...