Prev
14 There are three contoured supports like this supporting it all
Next
Prev
Board made utilizing some scraps to fill the hole from the Wallas (removed and sold). Just some scrap 1/8" ply epoxied together to make 1/4", then cut out, some cleats stuck to the bottom side, and then varnished.
Princess butane drop-in stove, flat stainless lidded version (other version has wooden cutting board that sits on top).
Princess butane drop-in stove, flat stainless lidded version (other version has wooden cutting board that sits on top).
14 There are three contoured supports like this supporting it all
12 this is how it gets back to the place where it goes across to port
11 water line runs along hull side out of the way
10 re-routed water lines to pump for clearer storage areas
Next
S

14 There are three contoured supports like this supporting it all

  • Media owner Sunbeam
  • Date added
14 There are three contoured supports like this supporting it all
Click to expand...
There are no comments to display.

Media information

Category
Galley area
Album
Sink cover board while varnishing. I made a similar one (sans hole) for the cutout where the Wallas used to be. It's surprisingly handy to be able to remove it to work on things (wiring etc.) under the galley, although I may eventually replace the whole galley counter and if so will likely make it a solid piece except for the sink cutout.
Added by
Sunbeam
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top