Prev
After the bottom of the hull was repaired I lowered the boat and supported it in three locations while I applied bottom paint.
Next
Prev
These are a bargain at $10 each from Home Depot. I use four total.
I used four ratchet straps and two recovery straps to hang the boat. The ratchet straps are attached to chain that's bolted to ceiling beams. The ratchets can be used to raise or lower the boat to reposition jack stands, or remove or replace the trailer.
Bottom work is finished and the boat is now supported in six locations. Note the yellow ratchet strap and orange recovery strap hanging to the right.
After the bottom of the hull was repaired I lowered the boat and supported it in three locations while I applied bottom paint.
Jack stand with keel adapter in place
Jack stand and adapters
Trailer removed and jack stands in high position with initial blocking under keel
Next
P

After the bottom of the hull was repaired I lowered the boat and supported it in three locations while I applied bottom paint.

  • Media owner pcg
  • Date added
After the bottom of the hull was repaired I lowered the boat and supported it in three locations while I applied bottom paint.
Click to expand...
There are no comments to display.

Media information

Category
From trailer to stands
Album
Moving from trailer to stands
Added by
pcg
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top