043 it\'s certainly not the most accessible storage but will be good deep storage and will add needed weight to the bow area

043 it\'s certainly not the most accessible storage but will be good deep storage and will add needed weight to the bow area

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
042 when it gets warmer I\'ll do another coat and paint all the exposed edges etc.

042 when it gets warmer I\'ll do another coat and paint all the exposed edges etc.

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
041 I knew I\'d need some of that paint for other areas of the boat so I left it at a single coat until I knew I was done with it

041 I knew I\'d need some of that paint for other areas of the boat so I left it at a single coat until I knew I was done with it

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
040 ya I splurged on some decent paint (I don\'t recomend foam brushes)

040 ya I splurged on some decent paint (I don\'t recomend foam brushes)

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
039 lots more sanding before painting

039 lots more sanding before painting

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
038 I smoothed out the bow stiffener (?)

038 I smoothed out the bow stiffener (?)

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
037 when I installed the deck pipe and the anchor locker drain I checked it for potential leaks - now I have access and if it did leak i\'ll know soon enough

037 when I installed the deck pipe and the anchor locker drain I checked it for potential leaks - now I have access and if it did leak i\'ll know soon enough

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
036 because my boat never had a deck pipe and the chain locker was never used it was bone dry under the v-birth sole

036 because my boat never had a deck pipe and the chain locker was never used it was bone dry under the v-birth sole

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
035 I borrowed the multi-tool I should\'ve borrowed to start the cuts for the lids to clean up the extra bondo or whatever this is

035 I borrowed the multi-tool I should\'ve borrowed to start the cuts for the lids to clean up the extra bondo or whatever this is

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
034 it\'s pretty ergonomic

034 it\'s pretty ergonomic

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
033 im not sure if it was necessary but I followed other\'s lead and drilled two lifting holes

033 im not sure if it was necessary but I followed other\'s lead and drilled two lifting holes

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
032 the finished project

032 the finished project

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
031 It\'s not perfect but the cushions wont snag anything

031 It\'s not perfect but the cushions wont snag anything

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
030

030

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
029 when I wiped the eccess epoxy I made sure to spread it on all the exposed wood and balsa core

029 when I wiped the eccess epoxy I made sure to spread it on all the exposed wood and balsa core

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
028 I used oval head counter sink SS bolts, washers and nylock nuts to snug everything up

028 I used oval head counter sink SS bolts, washers and nylock nuts to snug everything up

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
027 I carefully lined everythiing up and reclamped it

027 I carefully lined everythiing up and reclamped it

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
026 I traced where the opening actually was so as not to get epoxy on the part that shows and to make it easier to line up

026 I traced where the opening actually was so as not to get epoxy on the part that shows and to make it easier to line up

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
025 clamped the underframes to continue drilling through using the top holes as guides

025 clamped the underframes to continue drilling through using the top holes as guides

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
024

024

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
023 measuring for all the holes was tedious

023 measuring for all the holes was tedious

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
022 I pre-assembled the underframes to make placing them easier

022 I pre-assembled the underframes to make placing them easier

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
021 finally time to build

021 finally time to build

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
020

020

  • Media owner sebastien
  • Date added Jan 26, 2021
  • Reaction score 0
  • Comments 0
S

01 like a lot of C-dory cruiser owners I decided to use the v-birth foam space for storage.

  • Items 43
  • Album owner sebastien
  • Date created
There are no comments to display.

Album information

Category
V-birth storage
Album owner
sebastien
Date created
Item count
43
View count
1,286
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

S

sebastien

Media items
499
Albums
25
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top