Prev
(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.
Next
Prev
(AnchortownJim) The drawers I built to fill the void from the removed ice box. The fronts are made out of 3/4" Starboard.
(AnchortownJim) Glued a piece of 3/4" marine plywood to the hull with 3M 4200. Mounted the DC bus bars, one for the switched house circuits, one for non-switched and a common ground bus. This was driven by the installation of the windless.
(AnchortownJim) Pulled out the useless ice box beneath the helm seat. The object on the left is a Blue Seas Systems 8080 2 bank battery switch with a DC Breaker.
(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.
(AnchortownJim) Windless control.
(AnchortownJim) Quick windless below deck.
(AnchortownJim) ASTER 500 installed, starboard view.
Next
A

(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.

(AnchortownJim) Close up of the plug for the windless control. You can easily disconnect the control if you want to. I leave it connected on the dash.
Click to expand...
There are no comments to display.

Media information

Category
Coho Improvements
Album
(AnchortownJim) Quick ASTER 500 mounting plate made out of 3/16" 6061 aluminum, prior to being epoxied to the deck with MarineTex, side view.
Added by
AnchortownJim
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top