Prev
Cabin Roof Handrail Fasteners (2)
Next
Prev
Cabin Roof Radar Arch Fasteners (1)
Cabin Roof Handrail Fasteners (4)
Cabin Roof Handrail Fasteners (3)
Cabin Roof Handrail Fasteners (2)
Cabin Roof Handrail Fasteners (1)
5. Then I went into the 3/8" hole with this bit on the end of the dremel and cut out the foam. By using the 3/8" hole in the fiberglass I could run the shank of this bit around the hole and make a bigger hole in the foam core, down to the next layer of fiberglass. Blow the hole out and it's ready to receive epoxy.
4. "DREMEL" 5/16" CARVING AND ENGRAVING 115. For a #8 to #12 screw, I drilled a 3/8" dia. hole with a twist drill through the gel coat and the top layer of fiberglass, down through the foam core till I touched the fiberglass on the other side of the foam core.
Next
R

Cabin Roof Handrail Fasteners (2)

Cabin Roof Handrail Fasteners (2)
Click to expand...
There are no comments to display.

Media information

Category
Fastener Improvements 2009 23 Venture "Pacific Wanderer"
Album
1. Cockpit Floor Fastener Improvements. All original No. 10 screws and hardware still in place before starting improvements.
Added by
ross_ballard
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top