Prev
Dead bolt is removed by loosening two flat blade screws deep inside the lock frame. Do not remove the screws all the way, just enough to get the dead bolt out.
Next
Prev
Lightbar and reflective tape
This shows the effect of masking. Excess urethane can be easily trimmed from the glass but not the frame.
All went well except for this mistake. I did not mask both sides of the frame before applying the urethane window adhesive. The urethane really grabs the powder coating and is a pain to remove.
Dead bolt is removed by loosening two flat blade screws deep inside the lock frame. Do not remove the screws all the way, just enough to get the dead bolt out.
dead bolt removed from lock. This must be done to get the glass into the door frame.
door lock taken apart. The dead bolt is tricky to get out. See next picture.
corrosion under hinge.
Next
C

Dead bolt is removed by loosening two flat blade screws deep inside the lock frame. Do not remove the screws all the way, just enough to get the dead bolt out.

  • Media owner colobear
  • Date added
Dead bolt is removed by loosening two flat blade screws deep inside the lock frame. Do not remove the screws all the way, just enough to get the dead bolt out.
Click to expand...
There are no comments to display.

Media information

Category
C-Cakes
Album
giving C-Cakes her name
Added by
colobear
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top