Prev
Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.
Next
Prev
West systems epoxy and hardner
fast set epoxy and screws to make a right angle bracket to hold a fuel pump
Fast set epoxy
Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.
a layer of glass fibers and a layer of 10 oz cloth laid over the void with epoxy. A second layer of cloth is placed over this and into the transom opening
Void from the inside, cleaned out for glass application
Wood sanded clean--notice a small void at the very back, where the aft deck is attatched
Next
T

Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.

  • Media owner thataway
  • Date added
Final layer of epoxy, and 10 oz glass covering the hole, with two layers of 10 oz glass covering and tying the void in the foreward area--all water tight.
Click to expand...
There are no comments to display.

Media information

Category
Thataway
Album
In driveway
Added by
thataway
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top