Prev
Hole sawed my way down just about 1/4 inch to check balsa and create absorbent surfaces. I could actually see color change from wet to dry as I drilled outward and that was good to see.
Next
Prev
Bainbridge island in background taken southbound from sailing vessel Salpare
Riding the current at Hope Island
Aven's window
Hole sawed my way down just about 1/4 inch to check balsa and create absorbent surfaces. I could actually see color change from wet to dry as I drilled outward and that was good to see.
Epoxy filled then liberally coated with 5200 for that feel good water-tightness. bilge basket set down lightly on 5200 with a blob under each screw hole
If you rip the rail mount off the bar mount of a magma grill it slips nicely into a scotty downrigger mount for full 360 push button rotation and still removes with no tools.
Cockpit bilge depression where the screws were not sealed
Next
A

Hole sawed my way down just about 1/4 inch to check balsa and create absorbent surfaces. I could actually see color change from wet to dry as I drilled outward and that was good to see.

  • Media owner Aurelia
  • Date added
Hole sawed my way down just about 1/4 inch to check balsa and create absorbent surfaces. I could actually see color change from wet to dry as I drilled outward and that was good to see.
Click to expand...
There are no comments to display.

Media information

Category
25 Cruiser "Aurelia"
Album
A reborn 25 cruiser (Aurelia) just like it looks..AAAREYLEEAAA
Added by
Aurelia
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top