Prev
Installation for Standard Horizon HX471 handheld VHF with DSC. Cradle keeps radio close to my ear, connects to GPS for positioning and can be plugged in for charging at any time.
Next
Prev
Forespar Mini Galley gimballed propane stove with kettle mounted next to helm; provides heat in a pinch
Close up of holes drilled in bow roller and anchor shank
Anchor retainer using quick release pin to allow removal of anchor line from bow roller. Neoprene pad prevents scratches.
Installation for Standard Horizon HX471 handheld VHF with DSC. Cradle keeps radio close to my ear, connects to GPS for positioning and can be plugged in for charging at any time.
Instrument console: Ritchie Explorer compass, Garmin 545s GPS sounder, tach/ hour, tilt meter, horn button, intermittent wiper button, various electrical switches, 12 volt outlet facing downward under switch panel.
Cushion in place on berth extension. Very comfy! Width is approx 39" (single bed size) across extended section. Length about 7 feet.
Bow eye installed to provide attachment point for bitter end of anchor line.
Next
M

Installation for Standard Horizon HX471 handheld VHF with DSC. Cradle keeps radio close to my ear, connects to GPS for positioning and can be plugged in for charging at any time.

  • Media owner marco422
  • Date added
Installation for Standard Horizon HX471 handheld VHF with DSC. Cradle keeps radio close to my ear, connects to GPS for positioning and can be plugged in for charging at any time.
Click to expand...
There are no comments to display.

Media information

Category
Mods
Album
Anchor retainer using quick release pin to allow removal of anchor line from bow roller. Neoprene pad prevents scratches.
Added by
marco422
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top