Prev
making your own putty - use glass bead with resin mon =D
Next
Prev
starboard side by the helm - the thick part was just a 2x6 - you can see the glass bead was in the resin in these under-areas to help it all set up better :0|
under!! with this new design also came the possibility to glass it in from the underside as well! this was some very challenging work in tight space :0\ (do not try this at home!) =oP
detail; i used 1 inch ply for a stronger perimeter due to the added stresses that might come from an added hatch... also shows putty where the wood was not fit tight into the new design (cheating!) LOL
making your own putty - use glass bead with resin mon =D
close up - first coat of glass
going in with the new :0) I opted out of the little cavity they gave you at the factory that was for ? I liked the appearance better this way
nasty work! but i was young to then :0\ much of the perimeter of the old v-cut plywood was chiseled off - there was NO FOAM here =)
Next

making your own putty - use glass bead with resin mon =D

  • Media owner
  • Date added
making your own putty - use glass bead with resin mon =D
Click to expand...
There are no comments to display.

Media information

Category
v-berth recon (redfox)
Album
tearing out the first plan (additional fuel tank was first here) and going in with a new arrangement of the under-berth area of the Classic :0) ... the water tank and storage plan instead
Added by
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top