Prev
outboard bracket for dinghy motor storage, might be usable as a kicker in a pinch.
Next
Prev
outboard bracket after powdercoating, 2 bolts and 5200 to hold pvc onto bracket
No hinderance to turning of Port engine, and bracket does not flex (motor weight 97lbs)
6 by 6 aluminum angle, 1/2 inch thick, held on with 7/16 stainless bolts, insulated with neoprene washers. PVC lumber with countersunk bolts. We will see how it holds up.
outboard bracket for dinghy motor storage, might be usable as a kicker in a pinch.
bottom paint removed. gouges ground out and ready for repair. Whole bottom to be sanded smooth.
partially stripped bottom paint, angle grinder 50 grit disc. Transom shows previous bad repair.
photo 1
Next
C

outboard bracket for dinghy motor storage, might be usable as a kicker in a pinch.

outboard bracket for dinghy motor storage, might be usable as a kicker in a pinch.
Click to expand...
There are no comments to display.

Media information

Category
Carrera
Album
Sea Trial in SF Bay, Bay bridge ahead
Added by
chriscarrera
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top