Prev
Ready to install fender brace provided by Float On.Seems like it should be longer and have different bends so it will attach further out on the fender mounting channel
Next
Prev
Added gussets to light and licence plate bracket. Next need to add a loop of stainless steel stranded wire to loop around the frame and licence plate. The new bracket is also thicker adding the bottom gusset was a loser as it had to be cut away some to clear a bolt. The old bracket is laying on the floor
New fender braces by Float On another effort to keep fenders from shaking
Float- On fender braces added white dots are rain drops on camera lens
Ready to install fender brace provided by Float On.Seems like it should be longer and have different bends so it will attach further out on the fender mounting channel
backing plate
rear of fender
Used existing hole and bolt added the turnbuckle mounted wiith backing plate tightened up turnbuckle. Did stiffen up fenders added to front and back both sides
Next
W

Ready to install fender brace provided by Float On.Seems like it should be longer and have different bends so it will attach further out on the fender mounting channel

  • Media owner Will-C
  • Date added
Ready to install fender brace provided by Float On.Seems like it should be longer and have different bends so it will attach further out on the fender mounting channel
Click to expand...
There are no comments to display.

Media information

Category
Trailer Mods
Album
P1000486 Some scrap 3 x 4" aluminum angle 1/2" stainless u-bolt 35 dollar stainless turnbuckle, short piece of chain, and a shackle.
Added by
Will-C
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top