Home
Media
Our C-Dory Albums
FrankisCaptBobo
Didn\'t check the thickness of the existing glass until after I ground it down and felt that it wasn\'t just one or two layers of mat. It was already 3/16+, but because I already ground it and had 2 layers of 1208, 1 of mat and the PeelPly cut, I went ahead and applied...

$The light 3/8\" shims allowed for the ~1/4\" outside glass and a light 1/8\" of epoxy and microfiber paste.$

$with a narrow transom like this horizontal braces using the engine mount holes and 8\" screws works real well.$

Had some weird crap going on at the edges making me change my cut line several times... no biggie.

$Didn\'t check the thickness of the existing glass until after I ground it down and felt that it wasn\'t just one or two layers of mat. It was already 3/16+, but because I already ground it and had 2 layers of 1208, 1 of mat and the PeelPly cut, I went ahead and applied...$

Same...

FrankisCaptBobo
Aug 19, 2025

There are no comments to display.

Home
Media
Our C-Dory Albums
FrankisCaptBobo
Didn\'t check the thickness of the existing glass until after I ground it down and felt that it wasn\'t just one or two layers of mat. It was already 3/16+, but because I already ground it and had 2 layers of 1208, 1 of mat and the PeelPly cut, I went ahead and applied...

Same...

Media information

Share this media