Prev
Showing NMEA 2000 backbone connecting Garmin chartplotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400). Had to use a Garmin NMEA 2000 backbone kit; other brand didn't work.
Next
Prev
Added a 2nd shelf, for starboard side.
Showing Chartplotter, VHF, VHF mike, and cell phone holder.
Showing NMEA 2000 backbone connecting Garmin chartplotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400). Had to use a Garmin NMEA 2000 backbone kit; other brand didn't work.
Still need to find a good place for lines and anchor.
Port-side cuddy shelf. Attached to front (flotation) bulkhead, and cabin bulkhead
Port-side cuddy shelf. 3/4\" marine plywood. The long edge rests on the hull chine shape.
4 interlocked \"TrafficMASTER\" 3x3 anti-fatigue mats
Next
S

Showing NMEA 2000 backbone connecting Garmin chartplotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400). Had to use a Garmin NMEA 2000 backbone kit; other brand didn't work.

Showing NMEA 2000 backbone connecting Garmin chartplotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400). Had to use a Garmin NMEA 2000 backbone kit; other brand didn't work.
Click to expand...
There are no comments to display.

Media information

Category
Misc Updates and Modifications
Album
3/4\" Starboard mount for new transducer. Screws go into epoxy blobs in transom
Added by
Steve-in-SEA
Date added
View count
5
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top