Prev
the back is actually flush with the edge of the cockpit - there will eventually a seat and possibly back cushion on the cooler
Next
Prev
the stainless bar pulls out to instantly release all the chain with the rope coiled on the floor (Behind spare gas container and cooler)
the back is actually flush with the edge of the cockpit - there will eventually a seat and possibly back cushion on the cooler
the whole thing goes behind the cooler tucked away but at the ready? makes a handy spot for the boat hook.
.the anchor drops in and holds securely... it pops right out when needed in a hurry...
fender washers on the backside hold mounting bolt heads in the motor well
centrally accessible in a previously unused space
the obvious place to mount it was the engine well
Next
multimediasmith

the back is actually flush with the edge of the cockpit - there will eventually a seat and possibly back cushion on the cooler

the back is actually flush with the edge of the cockpit - there will eventually a seat and possibly back cushion on the cooler
Click to expand...
There are no comments to display.

Media information

Category
MARINAUT - CUSTOM COCKPIT ANCHOR MOUNT
Album
THE PROBLEM: It\'s large milk crate was taking up almost all the starboard aft storage area. I bought a vertical mount that didn\'t fit, so I made this one.
Added by
multimediasmith
Date added
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top