$The light 3/8\" shims allowed for the ~1/4\" outside glass and a light 1/8\" of epoxy and microfiber paste.$

$The side show what was under the black plastic trim it\'s full length. Dry resin starved mat... Nio wonder water leaked into the coring underneith.$

added ~3/8 shim close to the sides to add the gentle curve in my transom and allow for the outside piece of glass to go on flush 360degrees.

Again

$The light 3/8\" shims allowed for the ~1/4\" outside glass and a light 1/8\" of epoxy and microfiber paste.$

$with a narrow transom like this horizontal braces using the engine mount holes and 8\" screws works real well.$

Had some weird crap going on at the edges making me change my cut line several times... no biggie.

Same...

F

The light 3/8\" shims allowed for the ~1/4\" outside glass and a light 1/8\" of epoxy and microfiber paste.

FrankisCaptBobo
Aug 19, 2025

There are no comments to display.

Top