The upper side of this bracket pops up and this allows the table to fold down against the hull. The bracket holds tight is all conditions we have encountered despite the flimsy appearance.

How to cool the v-berth area? The small Frigidaire AC is place into the center opening window. I then made a funnel cover that fits over 1 side of the AC. It literally snaps on using 2 magnets. Holds fine and I then slide on the hose that runs into the v-berth. The air blows in quite strong and nicely cools down the forward cabin while the other side of the AC unit is still cooling the main cabin.

The upper side of this bracket pops up and this allows the table to fold down against the hull. The bracket holds tight is all conditions we have encountered despite the flimsy appearance.

Underside of drop-down table. A slide out plastic drawer has been installed on each side of the support bracket. A small thru-bolt is inserted in the track and drawer towards the back of each drawer when not in use to keep it from opening and spilling the contents when underway or while trailering.

Used the original dinette table and simply covered it with veneer. Then applied 6 coats of marine varnish.

Dometic Tundra refrigerator. Front door comes off and door panel can easily be removed to work on. Varnished veneer panel has been slid in front of original plastic cover.

M

The upper side of this bracket pops up and this allows the table to fold down against the hull. The bracket holds tight is all conditions we have encountered despite the flimsy appearance.

maryvmcclain
Jun 3, 2016

There are no comments to display.

Top