Prev
Trailer removed and jack stands in high position with initial blocking under keel
Next
Prev
After the bottom of the hull was repaired I lowered the boat and supported it in three locations while I applied bottom paint.
Jack stand with keel adapter in place
Jack stand and adapters
Trailer removed and jack stands in high position with initial blocking under keel
The floor jack was used to lift the stern, then a tow strap was put under the stern with each end of the tow strap attached to a ratchet strap suspended with chain from the ceiling. Then the same was done to the bow. Now the trailer can be pulled out form under the boat. Although the floor jack was used to do the lifting, I discovered that I can lift or lower the boat simply by using the ratchet handles alone.
Here the floor jack is being used with the extension for lifting the stern.
Assembled with extension for lifting bow
Next
P

Trailer removed and jack stands in high position with initial blocking under keel

  • Media owner pcg
  • Date added
Trailer removed and jack stands in high position with initial blocking under keel
Click to expand...
There are no comments to display.

Media information

Category
From trailer to stands
Album
Moving from trailer to stands
Added by
pcg
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top