Prev
Transom, with wood core deliniated where the fiberglass bulges, between the bottom of the boat and under the deck
Next
Prev
Transom, just before compounding at transom corner and final epoxy coat on bottom of transom, where Transducer starboard block will be screwed into solid glass
Port side aft after buff and wax
Port side foreward after buff and wax
Transom, with wood core deliniated where the fiberglass bulges, between the bottom of the boat and under the deck
Photo outlining the part of the transom backed with wood. Cracks in to the splash well area from the top of the transom. Areas or repair deliniated in masking tape.
annotated void in the core at the transom. This core in the bottom of the boat should be separated from the transom core by at least a layer of glass and should extend to the extreme end of the boat, so there is no voids, where water can trap. The solution is to fill this gap with solid glass.
annotatred photo of transom. Note the layers of gel coat, both green and white which were under the filler. The filler is the only item which crosses the entire transom, no glass in this layer, so it is susceptable to cracks.
Next
T

Transom, with wood core deliniated where the fiberglass bulges, between the bottom of the boat and under the deck

  • Media owner thataway
  • Date added
Transom, with wood core deliniated where the fiberglass bulges, between the bottom of the boat and under the deck
Click to expand...
There are no comments to display.

Media information

Category
Thataway
Album
In driveway
Added by
thataway
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top