Prev
We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?
Next
Prev
Yes, it was necessary to move the gas tank forward before drilling. Careful, careful, careful.
Ouch!
Must clear the trim tab. Must not interfere witht the main. Must tilt up. This position is a little far to the starboard side, but with the kicker raised, will work.
We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?
My buddy Charlie, a professional boat mechanic. We need to make sure that there is clearance between the main and the kicker.
Just where to drill thoses holes?
About to install a kicker mount. We are using a 15" shaft 6 HP Nissan motor whose primary role is on our inflatable. Emergency use on the 22 only.
Next
S

We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?

  • Media owner Swee Pea
  • Date added
We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?
Click to expand...
There are no comments to display.

Media information

Category
Swee Pea
Album
Not an original photo of Swee Pea, but her twin.
Added by
Swee Pea
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top