Recent content by Amphion

Resolved! I have breakers like the one pictured. The level on one is yellow. The other is black and was hidden by a cable. Okay I'm a twit.....but a happy one! Thanks for all the replies!

I found a couple of breakers and reset them...still nothing.

Hi All, I have an issue and hope with your help I can resolve it. I brought my boat home out of storage. I ran the motors, no problems. Checked that the bilge pump was working..no problem. However, I can manually turn on the bilge from the helm, but everything else is dead. I have checked both...

Well I went and checked my boats bilge area for the "mysterious holes" but mine doesn't have any. So I lowered the nose wheel of the trailer as low as I could, to see if any water appeared in the cabin or under the V birth, and left it over night. The following day a small puddle had...

Sorry for not responding, but I was away on holidays with the family. Now I am back and will try to resolve where this water came from. The cabin floor is curved in my boat and there is what looks like a plug under the Portapotty. I am going to try to remove it and see if water is trapped...

No hole between the cabin and cockpit. I put down interlocking tiles in the cockpit.

I have no floorboards! There is, what looks like a plug under the ports potty But it looks fine. I felt around under the Vberth and it felt dry? The mystery continues...

I just pulled my boat out of the water yesterday. Cabin was dry. As I put on the tie downs I decided to pull the drain plug as there were a few hills to climb and thought it would get any water out of the bilge. Cabin was dry. I got the boat home and gave the hull a quick clean and then took it...

I don't mind as at they don't get political. :)

I did the first lawn cut this past weekend. Next weekend a buddy is coming to stay as my wife and daughter head off on a trip! He is a boat nut too. He and I are going to get my boat already to go for the season. Nice to work with someone on your boat who likes boating as much as I do. A pair...

Well, 1. I pulled the ice box and wrapped it in the foil bubble wrap for better insulation. 2. Replaced the rubber cable boot (if that's what its called?). 3. Started laying the new flooring under the dinette. Now I can't wait until tomorrow to pick-up where I left...

173

I have reposition this!

In the boatyard