Recent content by kcassal

  1. K

    Hydraulic Brake Line Replacement

    Hello, I have a Venture 26 (Cape Cruiser) with a 2008 King trailer. I've already replaced the 4 disc brakes and the electric over hydraulic actuator. I'm noticing that my line from the actuator is losing its protective cover (from UV I suspect). Do folks typically replace all the lines on a...
  2. K

    Venture vs. Cruiser for fishing and ride - PNW

    I owned a 22 and now own a 26 Venture. The Venture is set up for fishing with 2 aft Scotty mounts and 1 just forward of the cockpit for a pot puller. It's a great fishing boat as long as you take the aft cockpit awning off. We spend a week or two in the San Juans every summer with two adults and...
  3. K

    Canned Coho!

    Awesome. I haven't caught enough Coho to think of canning this year. The run in area 13 has been slow. I've been canning Albacore the last few years. It's well worth the effort.
  4. K

    C-Dory 25 Cruiser - Real World Engine Upgrade Options

    My Iggy - you had twin Honda 150s on a 25? Tell us more about that setup!?!
  5. K

    Bottom paint in the PNW for trailered boat?

    Micron CSC is a "hard" ablative that is made for trailer boats. No buildup and will last for multiple seasons. Hard enough to be pressure washed. I've been happy with it in the PNW. Probably good for 5 seasons in the Puget Sound.
  6. K

    Bottom paint in the PNW for trailered boat?

    Interlux Micron CSC
  7. K

    Spot shrimp in the San Juans for 2024

    Fairly easy limits in Hood Canal. Saturday we were done after first pull.
  8. K

    Big 'ole cooler to double as bench seat?

    I put the Blue 100 quart in the Venture 26 and it's great for a seat and holding a ton of food for longer trips. Quality and good height profile for sitting. I swap out to a smaller cooler for fishing. https://bluecoolers.com/collections/blu ... ded-cooler
  9. K

    Cockpit Fishfinder / Plotter

    Thanks for the feedback! I've been trying to use the iPad. It does a good job of mirroring the Garmin however it needs to be plugged in for a day of fishing and the screen behind a waterproof cover is not nearly as good as a proper plotter / fish finder. I'm going to keep experimenting with it...
  10. K

    Cockpit Fishfinder / Plotter

    Just an FYI. For trolling I've added a Garmin autopilot remote so that I can steer from this device while fishing in the cockpit. Not so helpful for docking or other things but I've been really happy with it for fishing. https://www.garmin.com/en-US/p/636376
  11. K

    Cockpit Fishfinder / Plotter

    That's pretty slick. I'm not going to do a second helm but this is a very clean install by Colby: There's way less room over the window on the C-25 vs the Venture 26
  12. K

    Cockpit Fishfinder / Plotter

    Hey. Wondering if anyone has installed a cockpit fishfinder or plotter. I'm thinking of installing a 7" plotter above the bathroom window on a Venture 26. Wondering if anyone else has done a similar thing.
  13. K

    Venture 26 / Honda 150 Prop Suggestion

    I now have Sandy's S3x14.5x15R from his old motor. The prop is in new condition and I'll report back after testing. Current prop: Honda SS S4x14.25x15R New Prop: Honda SS S3x14.5x15R Should be an interesting comparison. I'll let ya know. Thanks Sandy! C-Brats are great!
  14. K

    Venture 26 / Honda 150 Prop Suggestion

    I'm interested in trying a 3-blade vs the 4-blade on the boat now. Seems like it would get RPMs up. Obviously pros and cons to both. Probably the 14.5? PM sent.
  15. K

    Venture 26 / Honda 150 Prop Suggestion

    Thanks all I really appreciate the feedback. I clocked 30 or 31 MPH so about 27 Knots with 70+ gallons of fuel on board, two adults and one kid. So not the lightest of loads but no camping gear and no water in the tank. The manual says 'full throttle range' is 5,000 to 6,000 RPMs so...
Back
Top