Recent content by PvL

Any suggestions for an inexpensive moisture meter that would work on wood and fiberglass?

Thanks for the prompt reply. That is what I thought

I have a Bennett Euro style model Ben ES-2000 controller for my trim tabs. The right switch has lost resistance and does not work. The switch just flops back and forth. What might the problem be? I have checked the wiring, hydraulics etc All good. Is the switch just worn out and...

We ran into a family from Vancouver Island this summer while kayaking through Sugglers Cove on BCs Sunshine Coast. They had one of those roof top tents on their CD 25. The fellow said it worked for their family Never did get the owners name.

Hi folks. I am looking for some updated information regarding replacing the old-style helm seat in our 2007, 22 Cruiser. We want to improve comfort, allow the seat to swivel and have a lay flat back to add area for the kitchen. Has anyone used products such as these from Cabela’s/Bass Pro...

helm seating options

helm seating options

helm seating options

We have a 22 Cruiser (90 Honda single) on an aluminum double axel trailer, equipped with surge brakes and a 2014 V6, automatic, 4x4 double cab Tacoma. The Tacoma towed our 22 over the Canadian Rockies from the Sunshine Coast B.C to Edmonton, Alberta via the Coquihalla Pass (Highway 5)/...

Thanks Dr. Bob. As always, your practical nautical expertise shines through. I am going to try to locate some of the Pettit Prop Coat Barnacle Barrier, and use it this season. If not, I will try some low-cost high zinc hardware paint. Will there be problems if I use the zinc paint on my...

Is there anything new on the anti-fouling trim tabs front? In the past I have attempted to sand, prime and apply Micron CSC. This system kept the fouling at bay but washed off when I did my winter clean up. Since then, I have applied baby zinc which helps but I still get some growth. We keep...

Thanks for the info, everyone. Looks like the mediums have worked for others. :thup ...PvL

We have decided the spring upgrade to our 22 Cruiser will be replacing the rear lazarette hatch covers. There has been plenty of discussion on this topic. North West Industries, the current C- Dory manufacture, recommended the So-Pac Access Hatch through Fisheries Supply...

I am looking into changing the prop on our 2011 9.8 Tohatsu long shaft. We would be moving to a to a 7 pitch (part # 3B2B645140 3 blades). I am hoping this will provide more thrust and control. My dealer indicates there is a 4 blade available as well for about $30.00 more. The 9.8 Tohatsu is...