Recent content by SaturdaySchool

Backing to support inner skin and screw new core down to sandwich core to skin

Applying epoxy

New plywood core in

Fairing around new core

Glassed and faired

A35A1749-2A90-448F-AC25-8A824C4E8344

Rolled on gel coat. Maybe try to match slip stop some day. Or grind it all off?? For now it?s solid and dry

Planning the repair and outer skin removal

Removing the skin and core. A job for a good friend. Or perhaps a job only a good friend would do.

Rotten around hawse hole

Rotten around unsealed windless

Ready for new core

I have my fuel tanks out in 2004 22 cruiser. Fixing the rot where the screws went into the hull. Was thinking about epoxy glassing some cribbing around the tanks and the running the strap down to the hull. This would eliminate the board between the tanks and the cockpit. Is this ok? Or is...

Thanks. Ya I have been drilling and using the Allen wrench in a dill method to get any rot out. Then drilling bigger or another hole if I can’t reach solid wood.