Search results

From the emails I get it seems that Diamond Seaglaze has been bought out. Bill Kelleher

Also try Boat US http://www.boatus.com/ramps/ Bill Kelleher

Since you say the bulb goes soft I would look at the bottom of the pickup hose in the gas tank to see if it is plugged up. Bill Kelleher

I have a soft rubber ball stuffed into the hole the anchor chain goes through because I don't have a windlass cover. Bill Kelleher

Chucko, Thank You for starting this thread. It made me look at the bottom hinge screws today and yes they were loose. Bill Kelleher

I just typed in " uscg " Bill Kelleher

I would like to have the Boat US ramp locator in the Boat US app. Bill Kelleher

West marine http://www.westmarine.com/buy/afi--hand ... de--256693 Bill Kelleher

Try Mr. Clean magic eraser Bill Kelleher http://www.mrclean.com/en_US/magic-eraser

OK, Thanks. I will take a look. Bill Kelleher

Ssobol, Thank You, that is what I needed to know. :) BTW I have a new plotter and it will accept 64gb cards. Bill Kelleher

Thank's Tom, here is why I think my 90 will not work as it is not listed in the paragraph below which I copied from the Honda web site. NMEA 2000® Signal Supply Cable The cable supplies the information signals from the onboard engine computer to the NMEA cable connection in the boat. 9.8 ft...

In looking at these Micro SD cards, I am seeing a $50 spread for the same size. The guy helping me said the only difference in price was the size. I feel he was wrong. Can anybody explain the difference in the same size card and which one is best for updating charts in a MFD ? Thank You...

I just happen to have a Scangauge. Thanks, I will look into doing that. Bill Kelleher

Thanks Foggy, I am glad I didn't spend the $1000 on the digital gauges. Bill Kelleher

Has anybody heard if Garmin is going to come out with a way to connect a 2013 Honda BF90D to a NMEA 2000 backbone ? I am upgrading my electronics to Garmin GPSMAP 1040xs and was hoping to get more engine info but found out the Honda 75 & 90 do not connect to the NMEA 2000 backbone. Thank You...

What I do is just click on " View posts since last visit " then read from the bottom up. Bill Kelleher

Try to keep the VHF antenna coax as far away from any wires connected to the MFD & AP. Bill Kelleher

If your AC is built in ( not a roof top ) then find the coil that air blows thru. There should be a catch pan under it to catch the humidity from the air. Look for a drain connection and see where it goes and that all the joints are tight. Bill Kelleher

Does your raymarine device have a SD memory card slot ? My MFD software was updated by using the SD memory card . Bill Kelleher