Search results

  1. J

    Repowering 16' angler, thinking of yamaha 70 4-stroke

    I can't say how it will do but I did see a 16' with a 70 horse here in Juneau last summer. I have a 45 Honda with a Yamaha 8 horse on the transom and no problem.
  2. J

    Sad story. C-Dory in Sitka.

    KTOO online radio has story. Apparently hit by a wave in confused seas, then swamped. One dead, two rescued.
  3. J

    How to Heat a 22 Angler?

    Check out "Lavaner" diesel heaters. They have a 2Kw & 5 Kw model. These are top of the line for Chinese Diesel Heaters. You may want to visit "Chinese Diesel air Heaters" on Facebook for more complete information. Many are installed on boats with good results.
  4. J

    How to Heat a 22 Angler?

    Check out "Lavaner" diesel heaters. They have a 2Kw & 5 Kw model. These are top of the line for Chinese Diesel Heaters. You may want to visit "Chinese Diesel air Heaters" on Facebook for more complete information. Many are installed on boats with good results.
  5. J

    Question for CD-16s with kicker

    My 16' Angler has a 8 horse yamaha kicker and will troll as slow as you like. It also will move the boat at 5 knots as currently outfitted. :D
  6. J

    c dory 22 composting head

    You may want to consider a 5 gallon bucket with a lid. There are seats that are made to fit. Peat moss, sawdust, etc. to cover. No #1 keeps the odor down. A vent could be added and/or store in cockpit. Line it with a plastic bag for easy disposal. Voila, basic composting head.
  7. J

    70 horse Yamaha on a 16" Angler

    Not having any luck uploading a couple photos of an 16' Angler with a 70 horsepower Yamaha I spotted here in Juneau. It has a beefed up transom done in Aluminum.
  8. J

    Trailering long distance advice 16' Angler

    When I lived in Reno I bought the Palomino in Washington and just hooked it up to my tow rig and drove it home. I remember getting a permit from the state okaying the trip. I drove slower than usual in the right lane and did a walk around the 2-3 times I made a stop. I took the 2 lane highway in...
  9. J

    Bilge Pump for 16'

    I mounted a thin piece of plastic cutting board material using 5200 and weighted it down. Then screwed the base of the pump to it after it was set. Bought an Amarine pump and an on, off manual switch for it. Roughed up the fiberglass with sandpaper before setting the 5200. Worked out fine.
  10. J

    Odd-ball C-dory

    There is an open console 22 on Juneau craigslist with a 115 horse for $14,000.
  11. Hauled out after fishing

    Hauled out after fishing

  12. J

    Comment by '' in media 'P1040590'

    Thanks Catman
  13. Lil Toot

    Lil Toot

    Lil Toot
  14. J

    reno camping

    Hey, Checkout Bordertown RV park on highway 395 at the California/Nevada border. 2-3 miles from the air races. Nice rv park, restaurant and tourist casino. Call ahead during special events! The closer you are to the races the more you'll enjoy being there! Also Shamrock RV park next to Bonanza...
  15. J

    Seat Post repair on a 16ft Angler

    Shogimac, I had a loose seat pedestal too. I overdrilled the bolt holes and jb welded them. There is a dead air space under the cabin floor. Shorter bolts go on the outside so you don't puncture the hull. That area drains the cuddy to the bronze outlet behind the seats. I considered rotating the...
  16. J

    Under the seats on a 16 Angler

    Charlie, That plug is a drain for the cuddy. JT
  17. J

    Wild Columbia River Chinook Salmon $6.99 /Lb.

    I didn't realize there was a commercial fishery on the river still. A local market here in Reno is selling fresh kings this week though. How is the run doing up there ? JT
  18. J

    Disconnecting Oil Injection on Old Johnson 40?

    If you go to Iboats online forum for Johnson/Evinrude on page 13 there is a post by tmfd on 8/21/2009. He asks the same question. At the bottom of the page under "Similar Threads" "Cheesegrits" provides instructions. There may be a yellow plug under the cover near the oil line on your motor...
  19. J

    Heading west!

    Sorry Charlie! The President is in the White House, living good! JT :D * Couldn't help it Valkyrie.
  20. J

    Berth bulkhead removal.

    Nice work. I am wondering why you didn't round that sharp corner though? JT :smiled
Back
Top