Search results

I'm close to purchasing a 2000 22' Cruiser that has no trim tabs installed. I've never owned a powerboat (sailed all my life) so I'm not sure how big a deal it is to not have them on this boat. The boat has twin 50HP Hondas with no trim adjusters (Permatrim?). Here are three questions: 1) Do...

Very helpful - thank you all!

Hi all, I have an offer pending on a 22' Cruiser built in 2000. I seem to have heard somewhere that boats built in the late 90's and early 2000's were not built as well as newer models - especially when considering the way the balsa cored hulls were constructed. Any truth to that? Any specific...

Hi, I'd love to see photos of your 22' Cruiser. Here is my email address: nw_eagle@hotmail.com Thanks, Pete

Sunbeam: Yes, that is exactly the location of the cracks - your photo is very helpful - thank you! The cracks we saw are not "hairline" cracks, but pretty deep cracks through a couple of layers of roving. In fact, I'm a little surprised that there is still water filling the void under the...

Sunbeam: Yes, the cracks are in the outer lower corners of the "short vertical section that runs athwartships about 2" tall" in the entry to the V-berth, not in the shiny fore and aft sections on either side of the raised sole in the V-berth. Sorry, but I don't have a scanner. I'll try to get...

Wow, thanks for all of the inputs! Sure wish that I had taken a photo - I'll try to get one when I make the next trip to the dealer. To clarify (I hope)the location of the cracks, if you hung a curtain in the entryway to the V-berth area, the cracks would be visible just under the bottom edge of...

I'm very interested in purchasing a 2008 22' Angler, but have a concern about cracks (3-4" long) at the outer corners of the fiberglass bulkhead at the point where the V-berth pan is glassed to the hull (i.e. at the base of the entryway into the V-berth area - This is at the base of the raised...