Search results

Hmm, so I have been playing around with this, took the prop off and inspected everything, thought maybe I just didn't have it trimmed right or something. Last several times I took it out with just myself and it seemed to run good, was running just under 6000 RPMS 5800-5900, pretty steady and...

I took her out Friday, at full wide open throttle I hit about 5200-5300 rpm and reached around 21 knots, this was dead flat calm with no wind or waves and only me in the boat, but an okay amount of stuff. This currently is with an aluminum solas 3 blade 13.5 diameter 15 pitch. on a 22 cruiser...

I popped the hood and move the throttle selector and full forward and it moved the throttle pulley all the the way 100% up until it hit a physical stop, so it seems to be moving the throttle to wide open okay. Now I am concerned that I may have a spun prop after doing some more investigating...

I have had my boat for several months now and it seems like I have to push the throttle level farther and farther down to get enough throttle. Seems like it gets a bit more each time and now even with the throttle level all the way forward it still is not at max rpm's. I am new to outboards...

Just went out to look at it, was gonna pull the prop but it is cold and windy/rainy today so that will wait. It looks like the line got caught and rubbed on the outside of the propellor housing, forward right next to where it attaches to the lower unit. It doesn't look like any of the line got...

What exactly does the thrust washer do? I have it on a boat lift now is this doable reaching around from behind or will I need to get around behind to do this. The water is really low so if necessary I can stand in the water... just a bit cold now.

So I am new to outboard motors and wanted to get some help here. I have a Honda 75 and on my way back into dock I noticed that there was a foot long piece of mooring line wrapped around the prop. The engine was still running and I am not sure exactly how long it was like that. Most likely...

I recently bought a C-dory that has a propane stove top and propane heater too. It is plumbed to a standard size propane tank out back right next to the main engine, out of the cabin and out of the way. So far I love it, it starts right up and it will heat the whole place up very quickly. It...

Got my new "C-Falcon" stickers on... they look really nice!

Name Stickers On

Mia at the helm

Home Dock

At home on the dock at Bluewater Bay Marina

Picking her up from NC

Picking her up from NC

Picking her up from NC

Hi Bob, looks like we are not too far away I am over in Niceville. I am new to these chart plotters so not sure how this one is supposed to work, it is a CP390i model but the manual is really not very helpful, just says you can use a C-Card, not what they are where to buy them how to use them...

So I just bought a beautiful 2006 22 Cruiser and got her stored in a slip at the marina just a couple hundred yards from my house. Took her out once but a lot to learn. I just discovered that the rub rails are pulled out about 1/2 inch on both sides, does anyone know what the best method to...

Is there a company that makes these campertops for C-dorys or do you just have to find someone to make them for you? What does something like that cost? I assume that if you take the walls out it just acts like a sun shade?

Hello could I get a look at the photos too, pm'ed you my email.