Search results

Hello David, How about some black walnut I have a bunch of peices about three to four inches wide and a foot long and three quarters thick if you want some let me know and I can bring it to the boat show for you. Richard

Hi, the move off the wiper motor was for interference with the compass mounting spot I mounted my compass there and had to move the wiper motor around in order to get the compass to work at all. and still was barely able to take out all the variance. Those are some big magnets in those...

Hi ken, The commercial guys are getting some out of Cathlamut now .I am going to try and get some out of the columbia this year don't see why not they dip them just like on the bank only from a boat Richard

Hello' I just saw a add for the new 75/90 honda engines , electronic ignition fuel injection no more carbs and a different power head and they look a little smaller than the older models . I looked on line but all the honda site shows is the older models. Has anyone seen the weight and such...

hello, Had the same problem on the windows I used an old tooth brush and compressed air open the window as far as possible and brush the heck out of it blow out repeat until it works easy. Silicon spray doesn't hurt eather. Has worked so far on mine and it 6 years old now...

Thanks again for all the responses. I found that if you type in ezloader.com and click on estore you can order just about anything for an ezloader trailer on line. Shure saves a lot of trips. Richard PS the fenders are for another...

Thanks Dave I will call them in the morning. Need a set for a progect I have been working on. Richard

Hello, Does anyone know of any place selling trailer parts for ezloader trailers I need a set of fenders for single axle 3700 pd trailer in Silverdale or Bremerton ? Thanks Richard

Hi Mike, I'am thinking about going down to bouy 10 and was woundering how it is. Are the fish in yet ? witch side has been producing the most fish ? thanks, Richard

Happy Birthday Mike Richard

Hi Lyle, If your going in September make shure you have a good GPS and compass as the area gets a lot of fog then and can stay foggy for days. You should not have to much company then and it is really nice up that way. Richard

Hi Mike, Why don't you gust put in a switch that disconects the horn when the dome lite goes on should not be to hard for you and I would not think you would have to cut any wires. Goin to make it tough on them wouldbe pranksters who like to honk the horn while you got your head under the hood...

Hi, The snow pack for the snake river water sheed is 150 percent of normal and the Eagle Caps snow measureing stake is 25 feet long and they had to dig down about 5 feet to find it so plenty of water this year. Sorry about two post had it all in the first one but the the darned computer...

Hi, Went over to the Snake River the 24 through the 27 fished Oxbow mostly caught alot off fish one 17 plus and a lot of 13 and 14 inch ones . Brownly was perty slow they had just brought it back up to within 6 to 8 feet of full pool . They were working on the gates or something it was the...

Hi Mike, Any reports on sturgon around Astoria am going to be down that way this coming sunday for several days and was hoping to try for some. Richard

Hi , Went out of Port Angeles monday fished the rock pile and the red bouy no fish no bites. When I came in the checker lady said had checked 19 so far that day . Richard

Greg, I have used silca sand , the stuff they use in sheet rock mud. You can get it at the lumber yard and its cheep. I use it outside and wear a respirator . Might want to try it on a small peice first . Richard

Hi Greg, They are perty much for wood only. Richard

Hi Greg, boy that insen't that much bigger looks very nice I guess I am going to half to look at a Yamaha. I have small Jet lathe 9x20 and am probally going to get a Grizzly mill. They are both on the smaller size but my shop isn't that big so they fit. The lathe has worked out perty good so...

Thanks Greg, Been looking at the honda just can't seem to justify geting one yet. I have had a lathe for awhile now and am looking at a small mill, just some things you can't do on a lathe. Sure is nice to be able to fix somethings that you can't buy parts for anymore ( and a lot cheeper) ...