Search results

You should be able to turn the auto pilot data bar at the bottom of the screen so you don't have to give up half of your display.

I was just wondering if water was condensing under there. The floor at the bulkhead is glassed in by the factory and is balsa cored. The caulking there just fills the gap and shouldn't let water in. I talked to the factory about this. There isn't any foam just a layer of fiberglass on the...

There is a stringer down the center. I drilled a hole 1/2" in the vertical piece between the gas tanks and put a camera in there it was dry as a bone. I sealed it back up with a well nut so I could check it in the future. You really need two holes one right and on left of center. When I drilled...

Bullfrog News: August 12, 2022 Dear Partners: Future Lake Powell Ramp Operations This Season: A reminder to Lake Powell boaters - the Bullfrog North Ramp will remain operational for houseboats and larger vessels until lake levels reach 3529 ft. and operational for...

Working my way through the icebergs Endicott Arm.

Another Fords Terror.

Headed into Fords Terror.

In Gut Bay waiting for the tide so we can leave in the morning.

Looking out pf Baby Bear Bay.

AK0070E

AK0043E

AK0053E

AK0054E

AK0033E

Looking for Bear in Red Bluff Bay. https://www.youtube.com/watch?v=VN1SFVyxE4w

I have to disagree with leaving one of the terminators off. The terminators measure 120 ohms and they are in parallel in the circuit. So when both terminators are in the circuit you will measure 60 ohms. Your network should measure 60 ohms when resistance tested. 120 ohms means there is only 1...

Simple Explanation https://www.youtube.com/watch?v=11z81yPG_Mk

I haven't seen any of the 4 port tees that come with the terminators. The starter kit is here. https://www.amazon.com/Garmin-010-11442 ... 147&sr=8-4 and the 4 port tee is here. https://www.amazon.com/4-Port-MultiPort ... pons&psc=1 You will have some parts left over to expand when you need...

Yes you can start with one of the 4 port connectors and they do make caps for the unused ports.