Search results

We too are hoping to make a trip to Barkley sound. We have considered putting in at Neah bay and making the trip Via Pacific Ocean to Barkley Sound. We have been as far as Swift Sure Bank and that is almost 1/2 way there. It seems doable during periods of Calm water conditions in the summer. We...

Merry Christmas Harvey, and yes it is a white one here in Sequim. Merry Christmas to all C-Brats and to all a good night.

We have used both a three blade and a four blade on our 22. I liked the four blade. It had noticeably favorable handling characteristic around the docks. Seemed to get a good bit more bite in reverse. It seems to run smoother than the 3 blade overall. In a mpg comparison we got about 3mpg with...

I am really not trying to advocate catching two limits in one day. My point is meant to be that it is really hard to try to decipher WDFW rules. I still have not found anywhere in the regulations either in the printed pamphlet or the on line regulations that addresses fishing in the US and...

Basically the WDFW does not want you to catch a limit in Canada and then catch a limit in the US on the same day. On any day that you have reported to have fished in Canada you are not allowed to fish in the US. Of course if it isn't even open for fishing in the US it doesn't make much...

Reports say they have been catching them off the beach at Port Townsend and in Sekiu/Clallam Bay and Neah Bay as well as some of the rivers. They are moving fast and in all directions, so they are probably heading to Canadian waters too. I was marking a lot of fish on my sonar while tending our...

We use a tie rod the same as the one Pat is showing is bent and have had no problems with it. We have a 90hp Honda and tie it to a 8hp Honda and both motors are left in the down position while tied together.. We have many hours fishing in very nice to very rough waters. I would think that there...

We were on our way out of Sequim Bay on Monday morning about 8:30 AM for a week in the San Juans and the lady Washington went aground right in front of us. They were actually in the marked channel but on the wrong side of it for a ship that size. At 11:30 AM there was a predicted low tide of...

Bob You certainly could leave the screws and be OK. The reasons I would remove them and fill with epoxy are 1: this will provide complete encapsulation of the wood 2: It will leave a flush service on the V berth. The strength of a properly prepared epoxy bond will by far override the strength...

Sounds like a really nice project you have going. I may do something similar myself if I ever get time. For your lip consider doing this. Use the wood not PVC, (Kiln dried Doug Fir is a good choice-Oak is not so good) as the epoxy will adhere to the wood much better. Dry fit the wood lip by...

Floor still folds up for storage. Our butane stove fits here perfectly.

Over the winter I worked on a couple of interior modifications. The first was converting the passenger seat to one that is identical to the helm seat. It is more comfortable than the dinette conversion seat. It is mounted on a swivel and the seat has been raised to sit at the same height as the...

Top view of helm storage bin.

Small storage bin.

Seat swivels to face in different directions. The entire assembly can be removed with 2 bolts to convert back to original configuration.

Passenger seat reversed.

Storage box lid is mounted on hinges and much easier to access.

Passenger seat

Just looked closer at my photos, and will look at my boat later tomorrow, but I just don't think there is anyway you could mount the kicker directly to the transom with 12" Lenco Trim tabs, and clear them, unless you have the kicker trimmed up pretty hi. At least not with the kicker and boat I...

Kicker mounted to transom. fits like a glove but every thing clears.