Search results

Jay, You must have had a bad case of 3 footitis. When will the launch the new one?

Jay, I switched to Delta anchors about 6 years ago after a couple of experiences with claw anchors in grass. I haven't been disappointed so far including anchoring in the Cook Inlet in 200 feet of water with a 4 knot tide.

Bob, My porpoising is more a loading issue than anything else. For some reason when the water tank forward is full or near that, I will porpoise above 32. I had the boat up to 35 mph in water with a little ripple on top this spring with no water on board and it was a smooth ride at 5600 rpm...

Tom A couple of other things to consider. How high is your motor mounted? I have yet to have a motor mounted properly by a dealer. They generally all mount them too low. Having owned two C-Dory's and helping adjust a third, you need to look at the motor when the ventilation plate is...

Chris, I have a windlass, but when anchoring over 100 feet or so such as while fishing, I will pull the anchor with a buoy. It's much easier on all the parts especially the windlass as it is only pulling the rope in and then the chain. The anchor is on the surface. I use a steel ring that...

Chris, http://www.bosunsupplies.com/products2. ... duct=S0120 Try this.

Chris, I just use a large one of these: http://www.bosunsupplies.com/products2.cfm?product=S012.

Not being a dealer but having to support multiple boats and engines a long way from a dealer, here are my criteria: The best motor is: a. The most reliable (they all pretty much qualify) b. Has the best technical manual c. Requires the fewest number of special tools to do simple things...

Heard on weather radio in Prince William Sound: "Local observations at 1 PM on June 2. At Whittier it was sunny, reducing the visibility to near zero..." I have the audio file but don't have permission to post it.

I want to keep this alive with one more comment. It looks to me that the 1/2 ton Chevrolet (1500) with the right packages would have a Gross Combined Weight Rating of 15,000 lbs. With an Gross Weight of 7000 lbs (giving you about 2200 lbs for people, gear, fuel) you could tow 8000 lbs. This...

I bought a 2150 this winter and it works well with the dual NMEA output. Most chart plotters can take data at 38400 so the 2100 might be a good deal for someone. With my antenna up at home I have picked up AIS targets at nearly 50 miles, but I am at 700 feet so that was a big help.

Our prices in Anchorage are now $4.35 for reg and $4.55 for diesel. At least the gas is gas. Like Bellingham, we are bucking the trend with increasing prices and declining oil prices. Nationwide prices are down $.18 over the last month and we are up $.13 on unleaded. I might have to start...

Les, I have had a couple of PowerTech props and they always seemed to be about an inch or two steeper in pitch than their number indicated in a side by side comparison of a Solas propeller of the same pitch. The motor couldn't turn them as fast so to get comparable performance I had to drop...

I have always liked Solas aluminum and stainless props and today run a 4 blade stainless 15 pitch with an aluminum backup on my Yamaha 150. After experimenting with 4 different props that was the one that worked the best for all round performance. Boris, are you sure it is 16 pitch? Those...

I think if you look at the stern the answer to recovery is there. They have already attached a couple of buoys. Rig some more buoys across the stern to provide floatation as there will be some tides that will pick the stern up before the bow will float. I think when the stern starts floating...

A. Remove it. B. Buy a Porta Potti I have found the marine head more trouble than its worth. We don't have any pumpout facilities anywhere close, and my impression of macerators and pumps is they are problems waiting to happen. I had the rebuild the pump in mine once already. The porta...

The most likely cause of the problem is a connector. I just swapped a Shakespear 8 ft 6 dB antenna with some cable issues for a Digital 8 foot 6 db antenna connected to my Standard Horizon Matrix 2150. I am running that on the radar arch where I also have a 4 foot GAM stainless steel whip...

David, I did that with the Thetford 365 two years ago. It sits higher and is a better fit in the head. Much simpler to deal with. Don't let it get full, it gets heavy to move.

Sorry we won't be seeing you in PWS this summer. Enjoy SE, that's on our list in a year or so.

I had a 1500 in college. 6V system with bad battery and alternator. Had to push it to start. Yours is in much better condition.