Search results

This should be a great year there. More water than the last several years and the Castle Rock cut will take 12 lumpy and not-so-scenic miles off the trip for those of us starting at Wahweap. I entered the contest to guess the date for Castle Rock cut to get wet and I don't know what I'll do if...

If the extension adds displacement it changes some of what I said. The original post seemed to show an extension that only moved the engine without extending the waterline or planing surface. Maybe I'm not seeing this one right, but the extensions I've seen at boat shows do not add displacement...

Also, the existing transom probably isn't designed for all the extra torque that would be applied by that extension. This is probably a bigger concern than the balance I was originally worried about. The 22 C-Dory is a pretty ideal design. I'd be AWFULLY careful about basic changes. Details...

I'd guess the boat will be very tail-heavy with that addition and you won't like the result at all. My 22 cruiser has a Honda 90 and a 9.9 and it's a little tail-heavy I think. Even with the 90 trimmed all the way down I need some trim tab deflection to run at something like a 4 degree bow up...

Previous post: "one of nature's masterpieces"...... Funny. It's a man made lake. Just kidding around. I knew what you meant. It's a beautiful place and I'm looking forward to it again this year. I've been looking at some of my pictures and trying to imagine what it will look like with 20 ft...

18 times 3 divided by 3.5 is about 15.5, so your 14 kt result is slow and it sounds like the 4 blade prop is a less efficient design or one of the props is pitched inaccurately. In general, fewer blades are always more efficient. I've read some books on props. Two blades are best. You make them...

I did a little searching the forums but didn't find a thread on boat heights. I looked up the Erie canal website and they show 15.5 ft as the lowest clearance. I'm about to put a radar on top of a 18" or 24" mast or arch and it got me thinking about the subject. This is on a CD22. Also, road...

Okay, Bob, you've had enough retirement and boat cruising. Time to buy the company and get back to work, slacker.... :wink Jeff

I tried to do some reading online regarding NMMA certification. I didn't find much yet. It looks like it could very well be a fairly useless rubber stamp program that requires the manufacturer to give a bunch of money to a consulting organization in order to become certified. This ends up being...

Sheesh! I did some more Googling, using different terms and I discovered that Horseshoe bend is just south of the dam and Page, AZ by about five miles. http://www.gcollier.com/Horseshoe_Bend_ ... River.html shows a nice picture. It's probably rare to find a photograph. I'll bet it's only been...

I just received one of the new Garmin antennas. I have a 4212 chartplotter and the antenna has two wires for power and an ethernet plug for the back of the chartplotter. Couldn't get much easier than that. I plunked it on the roof and fired it up in the driveway. Seems to work, although I don't...

Hi, I've never been to Horseshoe Bend. I see a Great Bend of the San Juan River on a mapping program I have. Is that it. I looked at a couple Powell maps and charts but haven't found "Horseshoe Bend" yet. Is it about 30 miles up the San Juan River from the main lake channel? Is it about 6 miles...

I just realized I hadn't signed up for this yet. That's three total for this year :wink: . August Catalina, September Lake Powell and October Santa Barbara. I'm also cruise leader for the Oceanside Yacht Club and we're doing a week at Catalina in July. Looks like I'll be on the water a lot this...

Have you seen the reflectors built into plastic tube cylinders? Several sizes are made. Look up MOBRI or PLASTIMO radar reflectors. That's what I use on my sailboat and I guess I'll be moving it to the C-Dory some time. Nice clean design, easy to mount, no flapping or banging around. Same signal...

One thing you could do is buy the Yakima bars and kayak mounts separate and forget about their car towers. Make some wood or plastic towers of your own. A simple hole for the Yakima bar and an undercut round base to rest on top of your wooden handrails. You could put a hole through the tower...

Aha. I looked at Jim's pictures, as suggested, and I see that he used REAL raingutter mounts, and mine are really rooftop mounts with hooks that would reach under the rooftop next to where the door closes and seals with a weather strip. I may have confused others with my terminology. I think I...

On my setup the Yakima metal hook that's supposed to grab under the rain gutter is instead hooked under the C-Dory roof rails. By putting a wood spacer between the bottom of the plastic Yakima tower and its rubber pad I end up with the rubber pad and tower pressing down against the roof of the...

On my CD22 cruiser, I put a pair of Yakima crossbars across the cabin top and put some Yakima kayak cradles up there. I put my 13.5 ft Hobie on top the same way I do on my truck (or anyone would do on a car). I was going to make some custom towers to attach the crossbars to the C-Dory roof...

Lewmar makes a tilting bow roller bracket designed to work with their Delta anchors. I have one and it works EVERY time. Best thing the dealer did for me when setting up my boat. He recommended upgrading from the small fixed bow roller on the CD22 to this one. It's great. It does a nice job of...

Paul, You want to loosely pile the rode in a heap in the reverse order from the way it will pay out. (Bottom of pile is tied to boat.) If you coil it, part of the coil always finds a way to get under some other part while it's paying out and you get a tangle. If you use a bucket or bag, there...