Search results

I bought the boat with 285 hrs on it. My dealer felt the break-in may not have been done correctly. Dealer and I discussed a new powerhead and something else at 25k for the parts to go on an 11 yo motor. Didn't make any sense for that option. I've never heard of being able to rebrake-in any...

My 2013 Yamaha 200 has made oil for a while. Every 6-7 hrs I was changing the oil. Oil level rose about 1/2" in that time. Seemed to run just fine. 610 hrs. Had the bleed down test yesterday and was told they could not get any of the cylinders past 90#. Told should be around 200#. We discussed...

Just went in, without doing anything, and all is well. Maybe sunspots!! Benton

I just replaced my laptop and now no pictures are displaying from this site. My IT guy said he tried to go in on both Chrome and Edge and they did not display for him either. Benton

Pat, I normally enjoy your posts but this hurts. Best wishes getting back to your old self. Benton

Could you have been on low power? Benton

Sam, PM sent

I'm up by Swansboro and you are welcome to check out "Finale". The enclosed wet head, head room, bigger cabin and 200 hp are big advantages for the '25. If you are like me and don't do any real towing it is the way to go. I only tow when necessary due to service or hurricanes. We live on the ICW...

Pat and Patty, Sorry to hear about Baxter. Ann and I enjoyed him as did the groomers. He was a great friend of yours. Benton

Rob, Thanks, I missed that at the bottom. Benton

I have tried to use that for searching and all I get is: www.google.com is blockedwww.google.com refused to connect. ERR_BLOCKED_BY_RESPONSE My IT guy says it is something with the C-Brats website. Have I missed something? Benton[/b]

The electric Dremel with sanding disc and rough paper did the job and fast. Lot's of dust. The part is longer than the OEM so I cut off some of the tubing. Tubing was replaced a year or so ago. I used a flexible sealer so there wouldn't be any leakage. The 1 1/2" tubing was the same as OEM. The...

I'll probably use my Dremel with a sanding bit. Not rocket science. Benton

I did order the scuppers with the ss on the inlet. The hole in the fiberglass has to be made bigger and it has to be offset since it is close to the deck. What is the best way to grind away the fiberglass since I can't use the jigsaw. Benton

My 2012 boat does drain out the stern. I did see the plug with the stainless cover and thought that might give it a nice look. I will get 2 of those and just replace both at the same time. Thanks for the replies. Benton

The inside cockpit cover broke off and is lost. It is white plastic fitting. I found Marine East Boat Thru Hull 6740w 1 1/2". It does have the flat surface that is toward the floor. Does anyone have experience with this and do you think this is the correct one for our 25'? :shock:

T.R. Bauer And...how excited we get when a needed part is less than $100. Benton

Sorry for the delay replying to your questions to me. The fuel use was what I saw a few days ago. I probably had 60 gal of gas, no radar, didn't have the camper back top up(folded), water heater full but h2o tank about 1/2 full and about 400# of humans. About 12 mph breeze. Ran with and against...

My Yamaha meter(200 hp) shows best mpg when I am running 4100 and about 27 mph. Usually 3.0 to 3.4 My motor is all the way down but I play with the tabs Benton

Tyboo Since you are fixing the weather how about sending us some rain? The sound is full of salt water but we are in a drought. :smiled Benton