Search results

I currently have a 4ft antenna. I was having problems hearing :? , so I installed a remote speaker. I can hear much better now. My marina manager is 100 ton captain. I had bought an 8ft antenna. I was going to take it back ,He said to keep it and install it .I had alot of static on my speaker...

On sunday the 16, We were coming out of the Lynnhaven Channel. There was a 45-50 ft. yacht behind us, He had been following us since the Great Neck bridge overpass. It was supose to be a no wake zone, But everyone was passing me. Then after passing under the Lesner Brdge, sill no wake zone,He...

I mounted my throw cusion in the motor well,port side. I used over the tank toilet paper holders.I got those at WallM 8) art. Brake off the tabbs. To mount them I went to Home Depot. I got the FastSet Back Clips. Ground off the studs that are on the back. I used #8 ss screws. The rope is mounted...

Has onyone tried to use curtan vallances that I got at Lowes. I got somew today, very close to the burgendy color. Ialso got the rods as well.I donot have a camera, so I cannot do a picture. :idea

Please ad the Hunky Dory to the list .I do not know where the marina is .I would need directions to get there. :smile

I took the eboat out to day. The Chesapeak Bay was very rough. Waves at 5-to 10 seconds. I have trided everything that i was told to do. I am useing U.S.a fuel treatment.The engine runs fine at idle. But at 2500-3200 rpm. It runs very rough like the motor is starving for fuel.Thats the rpm I...

From my experience with boat bottoms. First sand the entire bottom with 80grit sandpaper. Then apply 2 coats of InterLux InterProtect 2000E. It comes in two colors. White and gray. I am warning you, that once it is mixed use it fast .A paint rollor with a fine mat works best. Use only stuff that...

I keep my boat at a marinia,in dry stroage.I have put a fuel stabilizer in both tanks when I last filled up. I get gas at my marina.They sell only sell mid grade. A lot of others get gas there as well. I am taking it back to my dealer.I have not seen any water in the fuel /water separator.

Does anyone know how long a Honda 90 should go between carb rebuild?I had the carbs rebuilt at 90 hours.Now it is doing the same thing again.I mean running rough at 2000-3000 rpm. I love the boat . It rides better than my Bayliner did.The C-Dory 22 is just right for my wife and I. Now I have a...

How do you tell the wave height. My wife and I took our C-Dory out today.We had to turn around. It was way to rough for us. We crested one wave and as we came down ,all we saw was water.The boat took it fine. We keep our Dory at VININGS Marine Center in Norfolk Virginia. :thdown