Search results

Newport motor shot

Southbeach launch

Been so long I forgot what it looked like with a motor The prop run with a 14.25 x 19 only gave about 5400 RPM with top speed of 36 mph so a 14.25 x 17 is on order. Looking for 5600 to 5700 RPM although the speed is about what I expected. Thinking I will pickup a 15 pitch for a spare/heavy...

Motor side view

Motor back view

Dave the Line-x was done by a local shop. stevej

Boris, the core cut out I have shows 4 layers of glass used. The total thickness of the fiberglass is slightly less than what the factory had. Mr. Becker did discuss this point with me and noted that he used a higher grade of glass matting so overall layup is stronger than factory product. I...

Finally hauled Shearwater to the shop today to have the motor installed and propped. Should get her back late next week Been a long and expensive road but feels good to be almost done and back on the water. stevej

Ready to mount the motor

Based on what I have learned from the transom rebuild on Shearwater I would do more than just a visual inspection if doing my own survey. There are some pretty easy things that can be checked without having a meter or drilling holes. On the visual part look closely at screwheads, see if there...

Tsturm, the old OMC battery switch survived 13 years without problem so never really thought much about mounting the new one in the same spot. It does get a saltwater wash periodically and they are advertised as waterproof right :wink stevej

Could not bring myself to install one of the fall apart 5 dollar boots while everything was apart on Shearwater. Also could not find any quality boots as far as I can tell they don't exist so made some up. Kenworth shift boot (very heavy duty) Pro-Comp shock boot Plastic tube from wire spool...

Boot installed

Ready to install boot

boot cut up

Cable boot parts

Joe, no transom wall although that is a beautiful job on Sea Skipper. stevej

Thanks Gary, looking a little less utilitarian now that I am getting things back in place. The Line-x I have in my truck bed has held up very well over the last 6 years. It will collect dirt due to the open grain surface but a quick blast with the power washer and it looks like new. stevej

Nice to see some other e-tec owners on the board. Looks like next week I will have my 200hp mounted. There is a dedicated WEB site for e-tec owners that is just taking off. http://www.websitetoolbox.com/mb/barnaclebill Pretty good forum, found this very neat tidbit The V-4 and V-6 E-TEC...

Making slow progress but have reached that point in the project where more things are going back than coming off. Big progress today finally got the line-x coating sprayed on. The boat is a total disaster right now so excuse the mess. Overhead view Side deck view Gunnel step Stern view...