Search results

  1. Finally2

    Ballast

    I carry two 50lb ballast bags on my 22 cruiser. Have twins with permtrims and no tabs. Fully loaded with water tank and multiple passengers I list port significantly. Sometimes even with one passenger. The twins can balance it but effects my bow height which sucks when I wanna trim my bow down...
  2. Finally2

    DIY Cockpit Floor Deck

    I LOVE this. Do you happen to remember the size of the shim’s? I feel like that would be the hardest part. Lots of guessing and re-do. Looks like maybe 1x1in on outside and maybe 1x2 inside?
  3. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    Alright everybody thanks for all the reply’s. I just got back from a multi day bigsur trip and tested everything out. I hated the cans on the bow. The boat rode ok when I tested it in a day trip but I just need better vision. Honestly if I made my bigsur trip with the cans in the bow I may not...
  4. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    I’ll definitely trailer down south, probably launch outta Channel Islands since it’s a shorter run to island protection then cruise up to Santa Cruz. And I don’t plan on going to far into Big Sur. Head up outta Morro and crash in San Simeon cove for the night then fish Big Sur early and ride the...
  5. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    So just got back. It handled well. Biggest issue is lack of visual. It was foggy and I was mostly running off radar anyways. A whale could be an issue. If it was one 5 gallon tank the cockpit space wouldn’t be too big of an issue but I’m trying to bring 4 5 gallon tanks. I’d like to build the...
  6. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    Oh also! I don’t have trim tabs but have twins with permatrims and have never had an issue getting the nose up in following seas. In fact I had to swap out my captains chair with a folding one to be able to sit on top of it to be able to see in following seas my bow would get so high (plus a ton...
  7. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    http://www.c-brats.com/modules.php?set_ ... _album.php
  8. Finally2

    Adding 4 five gallon fuel tanks to the bow?

    Got a pretty stern heavy 22 cruiser and want to do some extended trips. I am on the central coast of California so we have some weather to take into account for sure. Not calm fjord cruising. I fish so I need all my cockpit space. I have gotten 4 quality leak proof (vp racing jugs) 5 gal fuel...
  9. Finally2

    Port livewell hose replacement

    So my port livewell hose broke due to old age. I attempted to replace it with sturdy clear tubing you’d use for bilge pumps and whatnot but it just would turn/twist correctly… so I took a heat gun to it but still in order to turn/twist correctly to fit to the discharge port it pinched down a...
  10. Finally2

    Thinking of twin tohatsu 60s

    Oh baby I just saw this. I thought it was my post it hit so close to home. I am currently repowering with twin Tohatsu 60’s at (inflatable) boat specialist in Ventura. I also often run heavy and loaded. Lots of ice, downriggers weights, kids, hell dragging kids in tubes, etc. I don’t expect to...
  11. Finally2

    V-berth hatch cutting tool

    Acetone did not work great. Most success came from an acetone wire brush drill bit and it cleaned off about 2 square inches and the wire drill bit was so saturated with the resin it was rendered useless
  12. Finally2

    V-Berth Storage

    Oh man I needed to hear that. I think this is an impossible task getting this out
  13. Finally2

    V-Berth Storage

    I posted some pics in my album if it helps to visualize
  14. Finally2

    V-Berth Storage

    So acetone is not doing much. Even with wire brush scrub with it. Had some success with drill bit wire brush and acetone but it loosened up/cleaned about 2in and the whole wire brush is now just thickly caked with the resin. I’d have to buy like 200 of these wire brush bits to do this… I don’t...
  15. Finally2

    V-Berth Storage

    I was curious about acetone but wasn’t sure if it was a bad idea. It’s INCREDIBLY TOUGH to get out. A heat gun has helped but still it’s 10x harder than removing the spray in foam which was not easy. I don’t know what to do. It’s incredibly sticky. It’s incredibly awful
  16. Finally2

    V-Berth Storage

    Any of you guys remove the foam and have the most incredibly sticky resin/glue smeared all over the place? If so how do you get it off? Putty knife is no match. I thought the play would be to remove it and paint in there with some gloss paint but getting it off is worse than getting the foam out
  17. Finally2

    V-berth hatch cutting tool

    Maybe just cover that sticky with a glass paint? If it would even stick?
  18. Finally2

    V-berth hatch cutting tool

    Alright so I’ve opened her up. TONS of spray in foam. I’m about 2/3 way from total removal. Do you guys have any insight on tips for removing this wax/resin coating the hull?? I can scrap it off with putty knife but there will still be this residual stickiness. Would acetone be a bad idea?
  19. Finally2

    V-berth hatch cutting tool

    Thanks everybody! Glad to hear the jigsaw turns the corners fine! It’s definitely my preference. I want to use the cut outs as well for the lids. I also am nervous about the epoxy wood holding. My buddy swears it’ll be strong enough but the piece of mind of machine screws with nylon nuts on the...
  20. Finally2

    V-berth hatch cutting tool

    Hey ya’ll! I’ve searched and read soooooo many threads on cutting into the v-berth. I don’t see anybody explaining what tool they used. A router makes sense but even being careful they can jump and ruin such a delicate project. A saw as seems to bulky, the glass seems too thick for a dremel. A...
Back
Top