Search results

hardee...the light I was referring to was the little light just above the cabin door . it to is prone to water leakage. I leave the pole light in the connector when my boat is at the marina and remove it when I am towing also. Thanks for the tip about the Pole light , good idea. Tug

Today, I finally fixed and got my navigational lights working again. I ended up " Up-Grading " the original switch with a SeaChoice 4 connector Push- Pull switch. The problem as suspected was the wiring form the Richie Compass that had been ripped out. I tested each connector at a time with...

I ended up ordering a Sea-Dog 3-connector push-pull switch. It was all that I could find on Amazon.ca and shipping was free. If I ordered from the States shipping costs for a 4-connector switch was around $ 30.00 and I am not sure when I would get it . Some places won't even ship to Canada...

I ended up removing the Navigation Switch this morning. Turns out it was a 4-connector Perko Switch. When I tried to remove the screw from one of the connectors a piece came off from the back of the switch. I have an elastic holding it together in the picture I posted. Two connector was...

Perko 4-Position Push Pull Navigational Switch

I will try cleaning and sanding the switches terminals first . If that doesn't work I will just replace the Navigational switch. It's a pain trying to find a short, every wire must have a couple of pin holes in them by now. I can't go walleye fishing at night until I get the lights working...

I just posted a picture of a 3-positional navigation switch that I found on-line. Is it as easy as swapping the new for the old or is there anything else I should be aware of like compatible amps and voltage or are these universal and fit all models.

3-position navigation switch

I just came back for my boat trying exactly that. No luck, I think I will remove the navigation switch from the boat and clean and sand all the connections. I would like to just replace the navigation switch with a new one . ( in case it's faulty ). but I have no idea if they still make or...

The other night I went to turn on my navigation lights and nothing worked. See pictures I just posted. The rocker panel navigation light comes on but when I pull out the knob to activate the running lights but the fuse blows. I have power to the back of the rocker panel and one of the three...

Back Side of Navigation Knob Box Right Side Back Side of Rocker Panel Left Side

Rocker Panel Right Side Navigation Knob Left SWide

Back Side of Rocker Panel

Rocker Panel Navigation Light Indicator Light On.

Robert maybe we will see each other on the river . I'm usually fishing there every day up by the Rapids or in front of the Canadian Power House . Tug

https://www.sootoday.com/local-news/vid ... al-3896339 https://www.sootoday.com/local-news/moo ... ms-3899631

I don't see why it wouldn't work just as well for roller bunks. I just went outside and looked at my trailer, these vertical roller bunks are set / positioned as far back on the trailer as possible and as close to the sides of the boat as possible. Closer than the side bunks. When you are...

http://www.c-brats.com/albums/Drifter/1 ... .thumb.jpg These work flawlessly any weather. Picture 268 in my album Side bunks PLUS Stern Roller Bunk Glide - On's

Great looking, I would love to get new 90 HP Suzuki outboard myself.

It's messing with my boat that pisses off most , it's not only my boat but my camper as well. That's a good idea about making your own alarm siren , I will have to do that and place the alarm inside my boat. I will post some pictures after i get it installed. Thanks.