Search results

Me: "Hey, where can I dock this thing?" Harbormaster: (looks at BEHEMOTH) Harbormaster: "... with the dinghies!"

Added a 2nd shelf, for starboard side.

Wow - I'm so grateful for all of your advice, insight, and encouragement... and warmth. Much appreciated, folks ;) I may have some follow-up questions as we prepare, and I'll share photos also ;) One step at a time! - Steve

Hi folks - I'm mostly new to boating, and the happy owner of a C-Dory 16 Angler. My son and I have crabbed and day-tripped in/around Skagit Bay, including a 40 mile day trip to LaConner. And now we're thinking about a more adventurous 2 day trip out to Friday Harbor, launching at Anacortes...

Hi Tom - I like the radio a lot, but you should note that I'm still new to boating, and that I've only had the radio on the water a few times (with boat under it ;). Some specifics: - It fits pretty well (for me) below and to the right of the wheel in my C-Dory 16. (There's a photo showing...

I thought I'd share my experience getting a Garmin chart plotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400) to talk to each other via NMEA, in the hopes it might save someone else some time. I started by networking the two devices with a NMEA 2000 backbone kit from...

Showing Chartplotter, VHF, VHF mike, and cell phone holder.

Showing NMEA 2000 backbone connecting Garmin chartplotter (ECHOMAP Plus 64cv) and Standard Horizon VHF (Standard Horizon GX2400). Had to use a Garmin NMEA 2000 backbone kit; other brand didn't work.

Still need to find a good place for lines and anchor.

Port-side cuddy shelf. Attached to front (flotation) bulkhead, and cabin bulkhead

Port-side cuddy shelf. 3/4\" marine plywood. The long edge rests on the hull chine shape.

4 interlocked \"TrafficMASTER\" 3x3 anti-fatigue mats

4 interlocked \"TrafficMASTER\" 3x3 anti-fatigue mats

3/4\" Starboard mount for new transducer. Screws go into epoxy blobs in transom

Hi Bob - thanks for your comments/questions! Much appreciated. My answers are below; feedback welcome: I went back and forth on this, and in the end decided that I wanted to be able to use the battery switch to cut power to everything in the boat. This is how it had been wired initially, and...

Here's an update on this project, in case the info might prove helpful to others considering something similar. Cuddy: - Battery in bolt-down frame (West Martine #17549718) - 150A fuse in holder (Blue Sea MEGA® / AMG® Safety Fuse Block) Stern: - Distribution Stud Module (dual) (BEP 702-2S) -...

Camano Island State Park (WA) - just launched

Langley (WA) - pizza and ice cream run