Search results

Interior

Galley

Looking at the picture, it might be Trim Lok trim seal or a similar product. https://www.trimlok.com/rubber-extrusion/trim-seal I've ordered it on Amazon and used it to seal kayak hatches in the past.

Boat Name Decal

Swim Step and Handle Installed

Not a hole, assuming I am looking at the correct Renogy DC-to-DC charger docs, but I would use 8AWG and 40A fuses for input and output of the charger. That way you only need one spare fuse size and wire size for the charger. 8AWG should be over-sized for the 20A load and distance between the...

The Victron Orion-Tr Smart DC-DC and XS chargers have engine auto-detection and Bluetooth. For what it's worth, engine detection and charging works fine with my old 2014 Evinrude E-Tec 90 and Tohatsu 9.8 kicker. The chargers have the option of connecting an ignition switch wire if the auto...

After watching teardowns of the batteries by Will Prowse on Youtube and reading some recommendations from other C-Brats, the LiTime batteries seemed like a reasonable gamble. No question that the Battle Born and Victron batteries are better built and supported.

I initially tried an Amazon warehouse deals Victron 30A model that turned out to be a Frankenstein refurb lemon unit. I was going to replace it with the same new unit, but Sunbeam recommended the XS or an 18A. (The 30A was too much for my outboard, but I justified it thinking the dual lead acid...

To take a crack at an answer for SoBelle without knowing the actual unit, either way will work assuming the charger output, ACC circuit, and battery are on a common circuit. My assumption is that there are multiple "output" terminals on the unit, or two wires are connected to the same output...

A diagram of my current lithium setup is below. A couple of negative bus bars are omitted from the diagram. I was originally going with the cheaper Victron 30A DC-DC charger, but Sunbeam recommended the XS model. The XS current limits are adjustable up to 50A, and it's a relatively small unit...

cdory lithium setup

Sorry to post this twice today, but I also replied to a similar "kayak rack" thread. I considered the budget plastic/conduit pipe options but opted for stainless railing components that match the boat hardware. The Yakima cargo rack might be able to clamp straight onto the 7/8in tubing if you...

I recently built a roof rack using off-the-shelf stainless railing components. It clamps onto the factory handrail, and I intend to use it with Yakima Jaylow kayak racks. I have not tested it with the kayak loaded yet, but the 7/8in tubing needed to be padded/shimmed for the removable Yakima...

Tohatsu MFS9.8C Kicker Motor w/ TH Marine Mini Jacker

I dock just inside of the locks on the lake side, so I'm not going through the locks this weekend. We went through to visit Bainbridge last weekend, and be aware that the small lock is closed for several months. You'll want a 2nd hand if you go through the large lock between now and mid-June. I...

I should be cruising from the Locks to Lake Washington and back sometime on Saturday if you see a green CD22 out there.

Congratulations on the new boat! I live in Seattle and bought a CD22 last year. It came with an older EZ Loader trailer, but I opted to purchase the boat without the trailer. Trailer storage alone at my dry stack facility is something like $150/mo (don't quote me on that). I do not anticipate...

Railing Components Roof Rack

The C-Dory 25 at Waypoint has a pending sale...