Search results

Tchefuncte River - Spanish Moss on Cypress

Thanks folks, I was imagining the road from Asheville to Cashiers with narrow switchbacks. We’re actually driving to Manitoulin Island Saturday (sadly sans boat this time) will be checking out possibilities for next summer. Looking forward to seeing y’all in October along with the brats. Soo...

Thanks so much for responding… Anyone coming from the Gulf Coast or points South who’ve done this route before? Best Dale

Seeking a good “flat” route north from the Gulf (hopefully avoiding mountains and narrow switchbacks). I was thinking of taking I 55 north passed Memphis & Cairo and then I 57 further north. Any advice from those who’ve experienced this route would be most welcome. Thanks in advance

Vasoline petroleum gel is thicker than marine grease - stays in place... Really thoroughly clean the threads of grit after draining before replacing plug.

Just got off the phone with Tiffany at the Marina... reservation in... so ready to get out... We've been on HEATWAVE LOCKDOWN here as are many of us elsewhere... cabin fever is setting in. I am hoping to make the October gathering at the land between the lakes Kentucky/Tennessee. Was trying...

C94A34DC-0487-4A91-8220-ECE4B77AFEDC

Since NOTHING will adhere to Starboard, I used butyl tape between the bottom of the holes where they met the cabin top.. tight acorn nuts underneath with fender washers make a durable seal

Working Alone: bolts from cabin roof. To seal I made a small circle of 5200 on bottoms of flanges and around holes on cabin top. The handrails were suspended just above holes for fine alignment without smearing sealant.

Working Alone: nuts inside cabin wrench on roof

115108E1-99DF-426B-B451-3A6CD73B3EDE

Filled and flush Taped underside of cabin roof and filled with paper funnel after brushing balsa core with unthickened epoxy

Holes redrilled perpendicular

Reamed and ready to fill

Ground a dremmel saw bit fir reaming core from hole sides

A few holes to fill & drill

C8BF0A9F-D4A1-4667-BD1A-BD398A682421

D8339454-DB03-4E3D-B893-55E761DB6F0F

Close up on SNAD connectors some Al plastic and others steel with flex for corvette mounting

Four glide oat applications up to Second plank above water line