Search results

Now that I am on my computer, and not my phone, I can add some more to my previous comment. The top provided by King Marine Canvas has a different configuration that allows us to enter the boat near the bulkhead. There are a number pictures on their web site...

Thanks for posting your drawings. I see one potential problem with it. Where do you plan to get in and out of the boat? The handle is on the bulkhead but you have a support beam in the way. If you plan to get in in the middle of the cockpit I don't think the vertical tube will provide enough...

Also, if you buy a standard bimini top, purchase one that is a bit wider than the cabin top with the frame slightly higher than the cabin top. That way you can bring the bimini top over the cabin and attach it to the railings with the webbing provided. That way the water will run off to the...

Donald, The side panels are attached with zippers to the top. What needs to be done is sew zippers (#10) to the top and to the panels. That way one zipper on the top can accommodate all three types of sides (see-through, mesh and privacy). You can buy #10 zippers in a variety of lengths and...

I agree with Bob (Thataway) that it is possible to sew your own tops. And, in my experience an old treadle machine is the way to go if you can find it. I purchased a 1929 Singer over 30 years ago from an antique store, and it is still going strong. Since the internal mechanisms are are...

I purchased the full camper top for my 22 cruiser last year from King Marine Canvas here in Seattle. It included the vinyl panels, mesh side screens and privacy solid panels, all for $3800 + tax. Be aware that these camper tops with side panels require that snaps be screwed to the outside of...

Also, I agree that additional protection is needed from side to side movement on the trailer. The C-Dories have relatively flat bottoms and can easily slide sideways on carpeted bunk boards. I urge folks to also consider side bunk boards that come up almost to the gunwale. I included these...

Another safety add-on for trailers that I have found very useful is a tire pressure monitoring system. This provides instantaneous readings of individual tire pressure and temperature on a small screen one can install on the dash. An alarm will sound if either T or P on any tire exceed pre-set...

P.S. I have a 17lb Mantus anchor for my C-Dory and the 3/8 inch bungee cord has a breaking strength of 400 lbs and the SS carabiners a load limit of 400 lbs.

Bob (Thataway), I think we have a different definition of anchor safety line. For me, and the definition I found on the web, is that an anchor safety line is one that keeps the anchor from accidentally releasing when in the up position. Namely it keeps the anchor tight in its mount while...

It all depends on whether you plan to keep the boat in the water, for how long, or on a trailer. If the boat is on a trailer and in the water for only a week or two at a time you probably won't need any bottom paint, and I would leave the current paint job on until it wears off. I cruise...

So, lots of questions, and the basic answer is it depends.... depends on what your needs are. 1. Boathook - I like the extendable ones with removable hook. It lets me have only one long stick onto which I can put the hook, the brush I use to clean the boat, and an attachment for an ACME...

Charging two batteries simultaneously only works if they are the same brand, same chemistry, same voltage, same amp-hours and same state of charge. Any other combination will result in unequal charging and potential damage to your batteries. Even if batteries are identical they will still...

P.S. I should add that I picked up the boat at the factory and did not have to pay for shipping costs. It was great working with NMI and they let me come watch when they were building it. I live in western Washington so I could visit them while it was being built.

The price of a new C-Dory 22 cruiser will vary depending on what you want added. I purchased a new one last year from NMI directly. Since I decided to go electric and bought my own motors and batteries the price of the basic hull was quite reasonable. NMI has a long list options at different...

To answer the question from SSOBOL: The window covers are stored in the Foc'sle. Together they form a block about 2.5 inches thick. We decided that sleeping in the V-berth would be too much bending and scrunching for our old bodies, so we use it for storage. NMI was very accommodating and...

Ivan, To answer your questions: 1. I have one picture of the window covers in my album. I glued fabric (a Ray Troll print) onto 4mm corrugated blue plastic. It does let a little bit of light through but not enough to be a problem at marinas. 2. I found that in bright sunshine (usually tied up...

If you get a camper top for the cockpit from King Marine Canvas in Seattle (they are the local go to for C-Dory tops) they can also make opaque "privacy" sides that zip to the top. We have them, and they fully enclose the cockpit for complete privacy.

Bob, I don't know if you looked at the correct winch on Amazon. The $154 marine winch listed there has a 100' nylon anchor rope with an eye on the end. https://www.amazon.com/Electric-Windlas ... 0CQP7H61S/ That said, I agree that this might be somewhat underpowered for a 16 ft C-Dory, and yes...

An inboard outboard is quite heavy in the back so I strongly suggest a dual axle trailer. After that, a galvanized trailer will be slightly less expensive than an aluminum one. As was mentioned, weight is a critical factor. The maximum capacity of the trailer should be at least several...