Search results

Never, EVER heard of ANYONE turning their Wallas into a "non-electronic" operation. When the problems start they can get very finicky, your idea of pulling it at this point is probably best or replace it with a new one. Good LUCK! If you were in the US most people at this point send it to the...

Hi Will C, My problem was 100% the piston not moving freely back into the caliper because of corrosion. This was also what Kodiak told me they weren't surprised about. I was cleaning and regreasing my wheel bearings when I tried to back off my pistons and discovered the problem with a couple...

Yes, I definitely sanded off the the previous work first. I experimented a little bit at first and could tell where the shop had gone wrong. if i didn't push down real hard on the roller you got the same crappy pattern that the fiberglass shop did. Lots of pressure on the roller was the answer!

My $1000 Kodiak disc brake system change out is now having problems. Pistons won't retract and I've already had to replace one set of disc brakes with there top of the line all stainless steel units that set me back $500 for just one axle. Their tech support wasn't surprised and said I did...

Finally tackled this project last summer and got some BEAUTIFUL results that look FACTORY! Much, much, better than a shop I won't name in Wasilla, AK who looked at the original non-skid and said it would be easy to reproduce (before they screwed it up royally) Wanted to pass this along because...

My Anti-Skid job

C-Dory Factory Non-Skid

Crappy non-skid job done by "pro" in Wasilla that I had to redo.

This project is now complete. Mixing small batches of 5 to 6 oz at a time seemed to help. I also think it was helpful to leave the epoxy outside overnight at 40 degrees instead of starting at room temperature. I didn't get a full cure until I stuck a 40,000 BTU propane heater in the open door...

On the way home right now from the four hour round-trip to pick up more epoxy in Homer, AK. No West system available only system three. No problem finding a similar epoxy but the filler was a little different. System three had a silica that I bought. I couldn't find what I thought was an...

Hadn't read the last post until now. Mixed up too much at one time and it ran away in my mixing bowl and now I'm out of epoxy. I don't mix peanut butter mixture enough to know how much filler it will take before hand. I had too much epoxy and was too slow adding filler to bring the thickness...

Thanks guys! I have the epoxy, cabosil and silica on hand (hopefully in sufficient quantity) Any advice for getting it filled all the way into the back side of the void?

Hello all looking for some advice. Noticed my Bomar hatch was leaking so decided to pull it and reseal. All the wood in the core surrounding the window was saturated with water. I dug out all the wet Core and now I need to fill the void. It measures approximately 1/2 inch thick and goes back 2...

Diamond Seaglaze guided me through the whole installation process. If I remember right the gentleman that helped me there was named Kim pretty sure they provided me some instructions too. Only glitch was I had to make part of the opening In my boat slightly bigger on one side. Jigsaw did the...

It's been 5 years since that post and I haven't had window problems ever since Diamond Seaglaze was great to work with and even had the technical drawings on hand for our windows. Replace the C-Dory mistake and dry up your boat!

Wow, nice to wake up to so many replies! My knobs are ceramic and look almost identical to the photos of the Canadian knobs that were posted. (Although not sure of the size) My threaded insert came out of my knob. I epoxied it back into the knob, but shortly after the expoxy actually gave...

Hope someone can help me. I had a cabinet knob come apart and I need to replace it. I've walked the aisles of Lowe's, Home Depot and a local hardware store and still haven't come close. I'd like to have one that matches all the others on the boat as close as possible. Anyone know where to...

IMG 4279

Just got back from a 10 day trip with the boat in Prince William Sound, incredible how well this worked. I love it! Simple and cheap solutioin!! Thanks again!