Search results

For similar reasons,I replaced my carbureted Honda 40's with the Tohatsu 50's a couple years ago.I couldn't be happier about the swap. I'm within 4 lbs+- , with better fuel economy and noticeably more power. While the Hondas still ran well, they were showing corrosion at the swivel brackets...

I'm curious about what year the change was made to make the fuel tank more accessible on the 25. I've given some thought to moving up from the 22 and one of my concerns would be, how to deal with a leak or sending unit gone bad.

I'm in Haines now with a similar plan to work my way in the direction of Icy Straight/Glacier Bay in 2-3 weeks.Any advice on the best route down the Lynn Canal ? The Eldred Rock observations have shown to blow into the 20"s almost daily the last couple of weeks or so now that I've been...

I recently purchased a new trailer with oil bath hubs. I'd like to know if any one has experienced water contamination and if so, how obvious was the change in appearance through the cap?

Just returned from our Desolation Sound trip yesterday. We launched and parked at the First Nations ramp right behind the Super Store. The truck sat in their lot for a week with no problems.We returned on a sunny Sunday afternoon and noticed it was busier , with fewer parking options than when...

In my case the filler runs across , from about the top motor bolt holes up. So it's likely the small separation wasn't going to get to the core. It was creeping me out though, seeing that separation and not know the extent of it under the transom cap

I went ahead and removed the cap. It was held on by a hard yellowish glue , so hard that it actually took a few chunks of gelcoat with it .I'll have to grind off what remained in spots. I'm going to try leaving the cap off. It looks like the very top of the transom had some sort of filler...

While I was epoxying my motor mount bolt holes,I noticed some delamination along top inside edge of my transom.I 'd like cut into the top to assess the damage and attempt the repair.The transom cap seems to be anchored down pretty well. What I'd like to know is if I manage to get it off and make...