Search results

i will buy if you replace. let me know

on some outboard motors pushing the key in does prime the motor. some choke by pushing key in. My 2004 honda has no primer or electric choke. I do not think they changed anything in 2005. Pushing the key in most likely is doing nothing. With the engine running push the key in. Should it bog down...

This is no joke. Wait to see how they word the warranty.

purchased a lewmar horizon 600 today. Found a guy locally that was getting his boat repossessed. $200 for the windlass 200' of rode and a 22lb danforth. Do not know what to do with that ship anchor. He also had a $8000 raymarine electronics setup for $2500. Would like to have that to but I do...

What is the best windlass out there for under a grand. I would like to buy one for the 22. Anyone out there have one they love? Anyone have one they would like to see go down with the hook. Thanks in advance for any help. I did see some of the older post but maybe there have been some change of...

Sounds like some are running with the anchor lights on. Good way to get into a bad situation. And a ticket if the man is around.

went out for a ride down the icw today. Only passed three or four snow birds in power boats. passed 50 or so sail boats. nice for me not having to deal with the wakes. I am assuming a lot of the big power boats are staying home this year. I talked to a couple of vessels while out. They loved the...

I will trade my 22 for a 25 if someone out there wants to be a little more cozy. :lol:

I have been in the fire and rescue biz for a while. First I would like to say that here in charleston the coast guard station is a buoy tending station. Should you need help they will come and get you but not your vessel. We could recall the "morning Dew" that called a mayday and they did not...

When you buy your new motor the dealer should give you a couple props to try. Load the boat the way you intend to use it and try a couple. The dealer you buy the motor from should do this with no problem. Just remember should you be getting a stainless prop use stainless to test with.

Thanks I am going to look at those pumps. Floor boards would be a pain for me. I use the boat mainly for fishing. It would be a pain removing them every trip to clean the floor of blood and fish parts. Seems like scuppers would work. However, you are right they are not real reliable. Seems like...

try ebay.

I have dry dek type matt now not doing the trick. Thanks for the link.

Does anybody have a good way of getting rid of water in the back of the boat. I have two bilge pumps. They will not pull the water level down that far. Has anyone put scuppers in? Would they work? I have a one inch mat on the deck it helps some. I was in four foot seas the other day and the...

bleach baby bleach. Then a good coat of wax

Valkyrie gave me a plastic keel guard when I purchased my Dory. I cut it into one foot strips and glued on the keel to protect the hull when pulling the anchor. This gave me about a 18" on each side of the keel. Due to a bad tide and a sharp turn I had to run the boat onto the trailer hard and...

As a dealer for the company they were the worst. According to former employee's they would not even try to help with warranty issues unless you bought a new boat from them. I called them for help and never heard back. I could go on..................... On a happy note the home makeover show on...

I just put lenco 9x12 on mine and they work great. Installed in one hour. $350 dollars on e-bay with switch.

thanks for the help. According to the specs on the 13000btu a 2000 gen. will get it done I will have to double check may have to move up a little.

moving up on list