Search results

LIne hauler on Cannon mount

Installed 12 volt CO2 detector

Installed 100 watt heater/fan/defroster

Adde grab bar by rear seat

She looks good in the yard (other than the snow!)

Copied this idea from another brat!

Name installed!

For those interested: It turned out that the horizontal table supports that the table sits on for the berth position were installed to low at the factory and C-Dory is sending me a new set (wider). Problem pretty much solved. As for the fridge, it turned out that a connector on the DC side...

All, I have pulled the fridge and checked power at the fuse there and have 12 v in and out. CD called me today and they are sending me a new fridge. As for the cushions: I sent CD pics of mine which are 1 1/2 inches lower than the seats. I don't want to have to pack 5 towels to shim it up...

David, Correct me if I am wrong, but I assumed that the switch(s) under the table are for 110 volt?? I don't see how that would effect the switching over to 12 volt but let me know if that is the case! I have completely disconnected shore power and the fridge manual says it should...

Jeff, I was being sarcastic on the fridge "only holds beer" (I don't even drink beer, didn't say I didn't drink though). The fridge will have plenty of room. It still is not working when shore power is disconnected. I was hoping there was a "switch" somewhere that I can not find. (House...

Well we "FINALLY" got our boat, CD25 cruiser, 2006, in the yard and spent the night (in the yard) on her. The Wallas did good but we cheated with an electric heater! Temp was 20 outside and warm enough for a good nights sleep. My questions are: (1)Can anyone tell me how the cabin seats are...

Trout at Nunya Lake

Ditto on the "join two pieces together" idea. As for trimming the hole, why not get a rubber or plastic grommet? Most auto and boat parts store will have a variety of sizes. Just make sure you get the grommet "before" you drill the hole so you can make sure the right size hole is drilled for...

Nick, I guess I would look and see if the idle stop (on the throttle linkage) is actually hitting the stop. I could see the linkage getting a bit "gummed up or slugish" setting for a long cold winter. If it is hanging up, maybe try and free it up w/ WD-40 or carb cleaner. (I have had this...

FYI: We used to catch quite a few white kings in Petersburg and Wrangel a few years ago (hmm, guess its been about 20 years!!). About 1 out of 8 would be a white. Pretty high numbers! Most of these fish were Stikine River fish. I did notice that the whites seemed to smoke up better than...

Landing on the ice at Nunya Lake

Landing on the ice at Nunya Lake